I have a h18 that has delaminated from the rear cross bar to the dagger board box. the previous owner sanded off the gelcoat and applied a layer of glass. when i step on the deck it bends in about a half inch and crunches. i have plenty of glass supplies to add more but i am not sure if i should instead inject resin into the hull. I am also in the process of painting the boat so the sooner i finish the glass the better.
edited by: rch701, Jul 06, 2009 - 03:21 PM
H-18 delamination
-
- Rank: Mate
- Registered: Jul 06, 2009
- Last visit: Nov 01, 2024
- Posts: 395
Posted: Jul 06, 2009 - 04:20 PM
-
- Rank: Mate
- Registered: Apr 26, 2004
- Last visit: Nov 05, 2024
- Posts: 399
Posted: Jul 06, 2009 - 07:14 PM
Do the injection thing..........
--
~ Vietnam Vet 69-71~ 17 Hobie w/big jib, ~18 Hobie mag,~DN Ice sailor,
and other toys.......
~~ I live in NY state on the north shore of Oneida lake in
Bernhards Bay. ~~~~~~
-- -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Jul 06, 2009 - 11:09 PM
I have a set of H-18 hulls (white)with croossbeams in good condition, $400, L.A. area.
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.