I have a 1983 Hobie 16 and am in the process of putting on new jib batten pocket protectors I got from Murrays (found on page 39 of current catalog).
They come with 1/8" round head rivets, what should I use to set these rivets? I have a rivet tool coming that can set blind rivets, but I know it won't work on these.
The only advice I've been able to find is to use a rivet set (looks like a punch) that you hit with a hammer, or the suggestion to use a ball peen hammer. Haven't had much luck finding a rivet set though.
Anyone have another way of doing this or know where I can find a better tool for it? I've seen some hand rivet squeezers, but they were priced over $100.
Should I use screws and nuts?
edited by: aleath, Jul 19, 2009 - 11:51 AM
Hobie 16 Jib Batten Pocket Protector
-
- Rank: Lubber
- Registered: Jul 19, 2009
- Last visit: Jul 19, 2009
- Posts: 1
Posted: Jul 19, 2009 - 12:12 PM
-
- Rank: Mate
- Registered: Apr 26, 2004
- Last visit: Nov 05, 2024
- Posts: 399
Posted: Jul 19, 2009 - 06:59 PM
Hand rivet squeezers aren't that much... ya might want to find another place to shop for them... I did use screws & nuts at one time...they worked alright!!
--
~ Vietnam Vet 69-71~ 17 Hobie w/big jib, ~18 Hobie mag,~DN Ice sailor,
and other toys.......
~~ I live in NY state on the north shore of Oneida lake in
Bernhards Bay. ~~~~~~
--
