Hey,
Does anyone have any details pics of a fully rigged Prindle 16? I just bought one and it's missing the sails and blocks and such. I'm trying to get a good idea of what I need to get her sailing.
Thanks
Brandon
Prindle 16 help
-
- Rank: Lubber
- Registered: Aug 27, 2009
- Last visit: Aug 28, 2009
- Posts: 1
Posted: Aug 28, 2009 - 11:20 AM
-
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
Posted: Aug 28, 2009 - 12:25 PM
DO you have any loose blocks that came with it at all the you could take a picture of and we could see what you do and don't have? or is there no blocks at all.
You should have something like this for the Main goes between the end of the boom and the traveller car on the rear beam. http://www.murrays.com/mm…y_Code=C-M&Store_Code=MS
And a couple of thease for the the Jib http://www.murrays.com/mm…y_Code=C-J&Store_Code=MS
as well as something like this for the jib clew http://www.murrays.com/mm…y_Code=C-J&Store_Code=MS however it does not have to be this you can make something from a couple individual blocks. In fact the manual for the boat says to just tie them to the clew with a short bit of line. but is is a more modern version I guess.
As I have a P18 I don't want to tell you about the halyards as I might get it wrong I'll let someone else
Also those were just easy images to get Don't feel like you have to buy these new. Give Prindle Pete a call at 909-800-5237 or email him at pbegle@charter.net and see what he has.
Here is a diagram of the jib rigging:
And one of the trap rigging:
Best I can do on short notice with a slow day at work.
edited by: Quarath, Aug 28, 2009 - 10:27 AM
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
-- -
- Rank: Mate
- Registered: Feb 06, 2009
- Last visit: Jun 25, 2017
- Posts: 223
Posted: Aug 28, 2009 - 02:56 PM
Brandon, post where you live, someone might, just might be local.
Dustin, thanks for these spectacular graphics. You are my Prindle Hero. -
- Rank: Lubber
- Registered: Jul 19, 2009
- Last visit: Aug 28, 2009
- Posts: 11
Posted: Aug 28, 2009 - 06:15 PM
I used the p16 manual and was able to figure the missing pieces I needed that way. It took me about an hour and a half to rig it by the manual. I think there is a copy in the tech help gallery. I got mine from the prindle site and printed it off. -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Aug 28, 2009 - 11:21 PM
Brandon, One of first things you'll need to know for sails is what jib you'll need. If you have turnbuckle at end of forestay and rope halyard with hook, you'll need ZIPPER luff jib. If no turnbuckle and chain plate at bridle, you'll need wire luff jib (like H-16). Pete 909-800-5237
Users on-line
This list is based on users active over the last 60 minutes.