Two questions about hull deck plates:
Can they be removed to have access to the inside walls, e.g when installing backing plates for connectors to a front tramp.
The antiglide surface; how to retain this when sanding and repainting?
Thanks,
Dan
Hull deck plates
-
- Rank: Lubber
- Registered: Jul 25, 2008
- Last visit: Aug 10, 2010
- Posts: 91
Posted: Aug 29, 2009 - 09:21 PM
-
- Rank: Mate
- Registered: Feb 25, 2007
- Last visit: Jul 13, 2012
- Posts: 414
Posted: Aug 29, 2009 - 09:54 PM
Are you asking about the factory deck or round deck plates like these?
-
- Rank: Lubber
- Registered: Jul 25, 2008
- Last visit: Aug 10, 2010
- Posts: 91
Posted: Aug 30, 2009 - 02:25 AM
Sorry, forgot to say I'm talking about a P18-2; the deck of the hulls with the textured surface, not the round deck plates. The latter are easy to replace.
-
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Aug 30, 2009 - 07:42 AM
Yes they can, go to www.catsailor.com and search Prindle 19, there is a person going through the process now and he has posted some photos. I also recall other posts there about thye same subject -
- Rank: Lubber
- Registered: Dec 09, 2008
- Last visit: Apr 06, 2011
- Posts: 99
Posted: Aug 30, 2009 - 04:37 PM
Here's a great article in Hobie Hotlines that details a process using a silicone mold to retexture a repaired deck. Check it out!
Molding link http://www.hobiecat.com/h…CA_Hotline11-12_2008.pdf
Application link http://www.hobiecat.com/h…CA_Hotline01-02_2009.pdf -
- Rank: Lubber
- Registered: Jul 25, 2008
- Last visit: Aug 10, 2010
- Posts: 91
Posted: Aug 30, 2009 - 10:16 PM
Thanks I can't find it on www.catsailor.com though, tried the search function too. Where am I supposed to look? -
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Aug 31, 2009 - 07:57 AM
Open forum page 8 "tell me about the Prindle 19" by turbo cat. You will have to join catsailor to view any pictures. It is a free site with tons of great information. You can ask any cat related questions and will responses from the best cat sailors in the world. -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Aug 31, 2009 - 11:23 AM
removal of the entire deck lid for a single point of access might be discouraged. you are looking at scraping apart the joint of the lid from the hulls (with a screw driver or chisel) and HOPING not to do damage that will need repair.
It is do-able but i would think a simple 4" or 5 (or 6) port would be much less drama, work etc. Not to mention it will then offer you storage.
I had 2 ports that i used to access my front hulls to add a simple eyestrap (with backing plate) for my front tramp tiedown.
This is the inside of a Mystere 6.0. (deck lid) and chain plate. i wouldn't want to remove that.
edited by: andrewscott, Aug 31, 2009 - 11:24 AM -
- Rank: Mate
- Registered: May 30, 2007
- Last visit: Jun 28, 2011
- Posts: 101
Posted: Aug 31, 2009 - 11:25 AM
You rang?
I will be posting more pictures tonight. I got my modded decks in from performance and will post up some pics. I used a putty knife and a hammer! very carefully.
The thread should be up top on the forum tonight after i update it. -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Aug 31, 2009 - 11:26 AM
as per the texture... there are textured paints, non-slip additives and/or ACE sells white texture in a spray can. works well...
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.