Thanks,
Dan
edited by: catdan, Sep 24, 2009 - 05:59 AM
Jib sheet jam preventer on P18-2
-
- Rank: Lubber
- Registered: Jul 25, 2008
- Last visit: Aug 10, 2010
- Posts: 91
Posted: Sep 24, 2009 - 04:57 AM
Does anyone have pic that shows how to tie the shock cord to the dolphin striker and around the mast? The way I do it doesn't look too elegant, plus the ends seem to slide along the dolphin striker towards the center.
Thanks,
Dan
edited by: catdan, Sep 24, 2009 - 05:59 AM -
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Sep 24, 2009 - 06:51 AM
Try putting a shockcord from the bridal wires to the point on the mast where the diamond wires end. Worked well on my P-19 when I had it and works well on my Nacra 6.0 now. -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Dec 04, 2024
- Posts: 7090
Posted: Sep 24, 2009 - 09:34 AM
you can see mine goes from just below the jib furler drum and attaches to the mast (by a line tied to each spreader wire)
-
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Dec 04, 2024
- Posts: 7090
Posted: Sep 24, 2009 - 09:38 AM
on my H18, i had a small eyestrap on the mast and would attach the preventer from the ends of the beam to that point...
