Water in the mast
-
- Rank: Lubber
- Registered: Jun 21, 2009
- Last visit: Jan 24, 2012
- Posts: 21
Posted: Oct 18, 2009 - 12:03 PM
I can hear water swishing inside my H16 mast. Thinking about drilling a small hole at the base to let it out. Is that a dumb idea?? -
- Rank: Mate
- Registered: Oct 19, 2006
- Last visit: Aug 16, 2017
- Posts: 613
Posted: Oct 18, 2009 - 04:21 PM
Not a bad idea, drill small hole that can be filled with silicone as a "plug". You want to go over the mast and fill every rivit with silicone sealant, check the mast base and the mast head. Try to achieve a sealed unit that can float, using the small hole you drilled pump air into mast and use soapy water to check for leaks, seal all leaks then if near a large body of water just immerse mast and check to see if it floats. A sealed mast will stop the H16 from turning turtle, imagine a H16 upside down with the mast filled with water & pointing at the bottom of the lake. Now imagine trying to right you cat.
--
TurboHobo
H14T
H16
P18
G-Cat 5.0
P16
-- -
- Rank: Lubber
- Registered: Jul 25, 2008
- Last visit: Aug 10, 2010
- Posts: 91
Posted: Nov 11, 2009 - 05:30 AM
http://www.thebeachcats.c…90-start-0.html#pid15384
Make sure it does not interfere with mast rotation. On a P18-2 it works fine.
HTH,
Dan
edited by: catdan, Nov 11, 2009 - 04:31 AM
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.