Some of you may remember that I looking at a Prindle 18-2 to purchase.
I asked the owner if the hulls, which are red, if they were gel-coated or painted and he said that "The hulls were painted with interlux epoxy paint"
Anyone familiar with this type of paint?
The boat is a 1989 model
Thanking you for your response
Jim
Question about Gel-coat vs. Paint
-
- Rank: Lubber
- Registered: Jan 03, 2010
- Last visit: Apr 22, 2010
- Posts: 19
Posted: Feb 07, 2010 - 07:45 PM
-
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Feb 08, 2010 - 09:44 AM
High quality, good lifespan, probably wont stain like gelcoat does (gas/oil from powerboats / and other crud in the water)
very commonly used 2 part paint. exceptionally toxic when sanding off (so you must wear full respirator gear if you ever sand).
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.