Hey folks: new to posting on this forum but have been reading for weeks. This site has helped me a bunch. For instance: barkeepers helper is the bomb! So here's my question for tonight...whats with the TWO forestay lines coming off the hound, and what is the giant SS pinky ring for? I Have this fantastic boat that I'm going to mast tomorrow, and I just dicovered this odd dual line where the forestay should connect. Could anyone help an old NACRA sailor?
--
Repairable P18
--
Prindle 18 forstay
-
- Rank: Lubber
- Registered: Dec 20, 2009
- Last visit: Oct 30, 2014
- Posts: 53
Posted: Mar 20, 2010 - 01:24 AM
-
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Mar 20, 2010 - 01:46 AM
The jib halyard runs through the ring and hooks to it.
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Lubber
- Registered: Jun 01, 2007
- Last visit: May 17, 2012
- Posts: 96
Posted: Mar 20, 2010 - 08:42 AM
Prindle 15, 16 and 18 Manual
Picture
Prindle 16 and 18: Attach the forestay to
the long pigtail (30?) with a 1/4? shackle.
The ring must face towards the mast.
The jib halyard with the
brummel hooks connected
together is lead
up through the ring,
through the short pigtail
thimble and back down
through the ring. Tie
both ends loosely near
the base of the mast.
edited by: ButchG, Mar 20, 2010 - 07:57 AM -
- Rank: Lubber
- Registered: Dec 20, 2009
- Last visit: Oct 30, 2014
- Posts: 53
Posted: Mar 20, 2010 - 09:30 PM
It looks like I could hoist an engine block with this setup. All that hardware for a jib?
--
Repairable P18
-- -
- Rank: Mate
- Registered: Feb 06, 2009
- Last visit: Jun 25, 2017
- Posts: 223
Posted: Mar 20, 2010 - 09:34 PM
Where does Captain Jon live? Maybe someone could lend a hand?
Users on-line
This list is based on users active over the last 60 minutes.