Hi there
I've very new to this website and have just bought another P16 after about 15 yrs. Got an absolute bargain on ebay - Aussie $860 for a superb condition P19 on a registered trailer.
The new cat, like my last one, doesn't have any rigging to allow me to raise/lower the jib whilst the mast is up.
I found some general comments on this site regarding jib 'uphaul' arrangements but would really appreciate if there was anyone with a photo or diagram they could post - a picture tells a thousand words !!
Similarly, I've read that the P16 goes like a dog if the mast rake is incorrect. Does anyone have a photo or picture shoing how I measure and set the correct rake angle?
Thanks in advance
Wazza_s
(Newcastle, Australia)
P16 Jib 'uphaul' arrangement and mast rake setting
-
- Rank: Lubber
- Registered: May 10, 2010
- Last visit: May 11, 2010
- Posts: 2
Posted: May 11, 2010 - 06:49 AM
-
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: May 11, 2010 - 06:57 AM
I have sailed and raced P-16 for many years and I never carried any mast rake, most of us carried the mast straight up and the boat seemed to perform very well. The P-16 has a lot more volume forward than a Hobie 16 and does not need the rake that the Hobie does. You can download a Prindle manual from the Performance site, either USA or Europe. -
- Rank: Lubber
- Registered: May 10, 2010
- Last visit: May 11, 2010
- Posts: 2
Posted: May 11, 2010 - 07:06 AM
Thanks for the quick reply Hullflyer. Do you know the URL for the website with the manual. I just Googled and couldn't see much making sense. -
- Rank: Mate
- Registered: Feb 19, 2008
- Last visit: Aug 26, 2023
- Posts: 671
Posted: May 11, 2010 - 08:04 AM
looks like performance catamarans have reorganised their website somewhat
but the prindle stuff was still buried in there at
http://www.nacra.us/Prindles/Prindle151618Manual.pdf
