I noticed when I took the Prindle out yesterday the mainsheet and blocks kept tangling up. I'm planning on buying some new line for my main sheet. I was thinking of using 7/16" New England Regatta line. When I checked it out at West Marine it seemed really subtle and would be easy to hold on to but when I tried to cleat it on my block it seemed to want to pop out of the cleat a little too easy. Anyone ever used this stuff? Other suggestions?
Steve
Best line for mainsheet?
-
- Rank: Lubber
- Registered: Apr 05, 2010
- Last visit: Jul 31, 2010
- Posts: 36
Posted: Jun 02, 2010 - 09:19 PM
-
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: Jun 02, 2010 - 10:02 PM
I prefer 3/8" for a main sheet, it runs a little better through the blocks and I don't notice a huge difference from the 7/16". It's more a personal preference and how long you sail for at a time. If you are out killing it all day the 7/16" may be better for your hands.
In the straight poly lines New England Sta-Set is the gold standard it seems, but is nearly double the price. Many, many sailors rave about the FSE Robline products!
If you are going to step up a bit to a mid level hi tech blend, New England Salsa line seems to be the current favorite. I use VPC myself but it is quite stiff and requires a bit of a break in time.
Everyone, did I miss anything? Anyone have a real favorite that I didn't mention?
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Jun 02, 2010 - 10:38 PM
Some lines > 3/8" will have trouble staying in a cleat just due to their size.
You might need to re-reeve the main sheet though. How was it getting tangled?
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Jun 02, 2010 - 11:10 PM
Most sailors in our club use 5/16, some use 3/8.
Can't go wrong with Sta-Set, comes in lots of colors and most Wests have it in stock. I use Salsa for my Spin sheet. I don't care for it as a main sheet, I want something a little more stiff, the same with the Robline racing sheet.
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Mate
- Registered: Apr 24, 2005
- Last visit: Apr 18, 2023
- Posts: 709
Posted: Jun 03, 2010 - 08:32 AM
I just switched to 8mm Robline racing sheet. Also looked at the NE Salsa line, but decided on the Robline.
--
Scott,
‘92 H18 w/SX wings
‘95 Hobie Funseeker 12 (Holder 12)
‘96/‘01/‘14 Hobie Waves
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Jun 03, 2010 - 08:56 AM
i love my robline!
its soft and doesn't retain water
if you really want it to run fast through the blocks, look at getting a tapered mainsheet from http://www.apsltd.com (call them) -
- Rank: Lubber
- Registered: Apr 05, 2010
- Last visit: Jul 31, 2010
- Posts: 36
Posted: Jun 03, 2010 - 09:36 PM
Thanks guys. I guess the New Englad Regatta isn't such a good line for the main sheet. I actually just washed the old sheet and stretched it out and after it dried I restrung the blocks. Seems to be much better now. I believe the sheet is New England Sta-set from what I can tell but since it was on the boat when I got her who knows? I'll still be looking on replacing the sheet later in the season after the rest of the upgrades I have planned. This thread will be a good reference point. Next up is repainting the top of the hulls and getting a new tramp to install.
Steve
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.