Looking for some ideas on aftermanrket spinnaker set up. What you have you done, got any photos you can post? Will be looking to possibly do this for Prindle 18-2.
Thanks
John
--
John Schwartz
Ventura, CA
--
Spinnaker Set-Up Pix
-
- Rank: Mate
- Registered: Sep 01, 2002
- Last visit: Oct 31, 2024
- Posts: 796
Posted: Jun 06, 2010 - 08:22 PM
-
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: Jun 06, 2010 - 09:01 PM
Here are a couple of examples using a Nacra 5.5 not exactly the same but the general idea is there. One uses a bag launch the other uses a end pole snuffer. Mid pole snuffer rigs are what everyone uses now.
http://home.comcast.net/~ragenpl/nacra/NACRA_55_SLOOP_SPINNAKER_USING_INTER_20_SNUFFER.htm
http://home.comcast.net/~ragenpl/nacra/nacra_spinnaker_1.htm
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Lubber
- Registered: Jun 01, 2007
- Last visit: May 17, 2012
- Posts: 96
Posted: Jun 06, 2010 - 11:58 PM
I made my spin setup on my P19, pics can be found at:
http://www.thebeachcats.com/index.php?module=pictures&g2_itemId=72912
The design was done after studying the manuals for the N20 and the F18 (all MFG's)
Some quite good technical writeups can be found at:
http://www.hobiecat.com/support/tech/sailboat.html
Materials:
Spin pole was bought at a local aluminum supply house, 24', 1.5" .065" sidewall T61 anodized and cut to 12'6"
Hardware from West Marine, wires I made at Wast Marine, end caps and pin from Murrays.
A mid pole F18 setup would be ideal for you IMO
Good Luck -
- Rank: Mate
- Registered: Sep 01, 2002
- Last visit: Oct 31, 2024
- Posts: 796
Posted: Jun 07, 2010 - 03:03 PM
Thank, saw what you did and it go me to thinking.
--
John Schwartz
Ventura, CA
--
