P-16 dolfin striker ???? noticed there is a bend in tortion bar,"flat bar spanning main beam"any source for these? need I worry?there is 1/4 inch of movement which Im not sure if tightning adj bolt will help. my other issue is all the cam cleats on blocks are worn out missing brngs ect.are these standard sizes? how do I measure or identify them to order replacements?Part#'s?
new sailor Bill
bent dolfin striker p-16&worn out cam cleats
-
- Rank: Lubber
- Registered: May 11, 2010
- Last visit: Dec 19, 2010
- Posts: 29
Posted: Jun 08, 2010 - 01:29 AM
-
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Jun 08, 2010 - 01:37 AM
Put a vise grip on flat of DS rod & see if you can tighten it, not too much to worry though. Be careful you don't turn too much to lose threads on half-round ball (maybe epoxy on to bar). Take cam cleats apart & see that they haven't "jumped" the small post inside. If they're Harken (black/red), spring is probably broken (Murrays has). Be sure to oil them. Pete
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.