Old gal getting a facelift! :: Catamaran Sailboats at TheBeachcats.com

Old gal getting a facelift!

SteveON

Rank: Lubber

Registered: Apr 05, 2010

Last visit: Jul 31, 2010

Posts: 36
Posted: Jun 11, 2010 - 06:57 PM

Sooo...I finally got my '81 Prindle 18 hulls repaired and all sealed up (thanks so much for all the help from my beachcats brothers). Now I'm turning my attention to some other areas that need fixed up. First I ordered a new trampoline from slosails, should be here next weekend. Next I ordered two new bridle wires and new trapeze wires from salty dog marine. I also ordered two new 6" hatch assemblys from duckworks. Before installing the new tramp or hatch covers I need to repaint the top of the hulls. One of the previous owners had repainted the hulls but I'm not sure what kind of paint they used. It's not a perfect job but the boat looks good from 20';however, the top of the hulls were painted terquoise the bottoms are white. The sails are med blue, orange and yellow (factory sails). Needless to say the clash of colors doesn't help the boats appearance. I'm trying to decide what kind of paint to use and more importantly what color to paint the top of the hulls. I am thinking about either a blue to match the sails (med blue), a sand color or possibly white. Any suggestions?
Thanks,
Steve
skarr1

Rank: Mate

Registered: Feb 25, 2007

Last visit: Jul 13, 2012

Posts: 414
Posted: Jun 11, 2010 - 09:01 PM

White is the only comfortable color to set on in the south!
Wolfman

Rank: Chief

Registered: Jun 24, 2009

Last visit: Jun 15, 2023

Posts: 1555
Posted: Jun 11, 2010 - 09:11 PM

I agree white on white looks good on any sailboat. Put a nice nekked pinup decal on the bows and you are set! ;) Yellow is tough to pull off unless the boat is SMOKIN' FAST and sand looks very early 80s.

--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
--
SteveON

Rank: Lubber

Registered: Apr 05, 2010

Last visit: Jul 31, 2010

Posts: 36
Posted: Jun 12, 2010 - 09:36 PM

Sounds like white is the way to go. How would you handle the non skid areas? Just paint over them and not worry about it? I'm thinking I'll use Brightsides white. Just scuff up the old paint, wipe it down and spray?
Wolfman

Rank: Chief

Registered: Jun 24, 2009

Last visit: Jun 15, 2023

Posts: 1555
Posted: Jun 13, 2010 - 03:48 PM

Mine was professionaly faired and gel coated so I have no idea about paint. I do know that my decks were baby blue and that they just painted white right over them. You could also attach a non-slip surface to it like Hydro-turf, but I would worry about it breaking down over time.

--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
--
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: May 22, 2024

Posts: 7089
Posted: Jun 14, 2010 - 10:23 AM