The slider on my jib zipper fell off to who knows where. The teeth are fine. Any suggestions other than replace the whole thing
--
Nacra 5.2
--
Nacra 5.2 zipper problems
-
- Rank: Mate
- Registered: May 29, 2010
- Last visit: Apr 28, 2015
- Posts: 454
Posted: Jun 15, 2010 - 12:47 PM
-
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: Jun 15, 2010 - 12:49 PM
A sailmaker may be able to put a new slider on for you, worse comes to worse a full zipper replacement is usually under $100. You can try asking a seemstress but they don't normally do such things.
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Jun 15, 2010 - 01:30 PM
no worries at all.. go to any canvas / bimini shop (or find one online) and get a new zipper car. usually a plastic #3 will work fine (on all the jib zippers i have seen). if you want to, get a metal one as well. the cost should be about $1.50 total.
with the plastic one, you should be able to force it onto the correct side. if not, carefully remove 1 tooth from the correct side with needle nose pliers.
i have gone through several zipper cars in my sailing career. no big deal at all. -
- Rank: Mate
- Registered: May 29, 2010
- Last visit: Apr 28, 2015
- Posts: 454
Posted: Jun 15, 2010 - 03:01 PM
Great I am amazed about how much info is out there'
--
Nacra 5.2
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.