• golfdad75
  
  

  • Rank: Mate
  • Registered: May 29, 2010
  • Last visit: Apr 28, 2015
  • Posts: 454

  Posted: Jul 15, 2010 - 09:34 PM

  Can I replace justh the cam cleat pn my traveler or do I need to replace bullseye and all?
  
  --
  Nacra 5.2
  --

  • 
  •  
• golfdad75
  
  

  • Rank: Mate
  • Registered: May 29, 2010
  • Last visit: Apr 28, 2015
  • Posts: 454

  Posted: Jul 15, 2010 - 10:03 PM

  Nevermind but can anyone tell me how I size the camz?
  
  --
  Nacra 5.2
  --

  • 
  •  
• pbegle
  
  

  • Rank: Mate
  • Registered: Mar 12, 2003
  • Last visit: Feb 19, 2021
  • Posts: 879

  Posted: Jul 15, 2010 - 10:45 PM

  It's probably not the cam that's broken but the little spring inside. Does only one cam not work, but the sister does ? Remove the screw, check spring--sometimes it just jumps off the little post--put it back on by over twisting it as you put it on. Harken (red & black) screw spacing is different. Remove it, pry off red plate on back, check spring--Murrays has them. Pete

  • 
  •  
• golfdad75
  
  

  • Rank: Mate
  • Registered: May 29, 2010
  • Last visit: Apr 28, 2015
  • Posts: 454

  Posted: Jul 15, 2010 - 11:03 PM

  Spring is broke, I suspect they are original OtherwiseDdo I go buy a harken cam cleat based on load? What is the load range? Sorry guys any recommendation would be welcomed.I was thinking line size would be 3/8 to 5/16?
  
  
  
  edited by: golfdad75, Jul 15, 2010 - 10:10 PM
  
  --
  Nacra 5.2
  --

  • 
  •  
• skarr1
  
  

  • Rank: Mate
  • Registered: Feb 25, 2007
  • Last visit: Jul 13, 2012
  • Posts: 414

  Posted: Jul 15, 2010 - 11:04 PM

  Try this. http://www.harken.com/Cat…mplementary-cam_kits.pdf

  • 
  •  
• pbegle
  
  

  • Rank: Mate
  • Registered: Mar 12, 2003
  • Last visit: Feb 19, 2021
  • Posts: 879

  Posted: Jul 16, 2010 - 12:53 AM

  The spring is about a dollar. Cleat about $35

  • 
  •  
• erice
  
  

  • Rank: Mate
  • Registered: Feb 19, 2008
  • Last visit: Aug 26, 2023
  • Posts: 671

  Posted: Jul 16, 2010 - 01:17 AM

  if it's just the spring you should be able to alter a similar spring to make it work
  
  pics would help...
  
  5? years ago i used the spring from a ballpoint pen to get a friends 50cc scooter gearbox to return to neutral
  
  the deal was he went and ordered the correct spring the next day
  
  he didn't and it's still running
  
  some springs, like valve springs and suspension springs, have a hard life
  
  others, like tiny return springs, do not and can be made to work in a wide variety of jobs
  
  
  
  edited by: erice, Jul 16, 2010 - 03:21 PM

  • 
  •  
• MN3
  
  

  • Rank: Master Chief
  • Registered: Jun 20, 2006
  • Last visit: May 22, 2024
  • Posts: 7089

  Posted: Jul 16, 2010 - 09:53 AM

  However... these little springs can be a real pita to get back in the right spot and to get the cleat to work. (Not impossible by any means but can be a pain).
  
  It MAY be a good idea to order both a spring and cleat. If you can get the spring to work, then you will have a spare cleat. Otherwise you may be spending time repairing a spring vs. sailing

  • 
  •  
• erice
  
  

  • Rank: Mate
  • Registered: Feb 19, 2008
  • Last visit: Aug 26, 2023
  • Posts: 671

  Posted: Jul 16, 2010 - 08:18 PM

  the sheet griping cam on my 5.2 traveller is solid alloy and i can't see it EVER wearing out
  
  just needs a little lube on the pivot occasionally
  
  and the correct tension on the through bolt so it can pivot freely
  
  and of course a spring that gives it 45? of movement
  
  the range of spring tension that would work is huge

  • 
  •  
•  
•  

Users on-line

• 0 users

This list is based on users active over the last 60 minutes.