INSIDE OF A PRINDLE HULL
-
- Rank: Lubber
- Registered: Aug 09, 2009
- Last visit: Jul 28, 2010
- Posts: 1
Does anybody has information on how the inside of a prindle hull looks like? I need to know if there are bulkheads underneath the posts, etc. -
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
under the for beam is an aluminum "t" bar that is glassed to the keel. i'll try to get some pics up later.
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
-- -
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
they are pretty open. What prindle. Most have ports you can open and look at.
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
-- -
- Rank: Mate
- Registered: Mar 04, 2010
- Last visit: Jan 14, 2018
- Posts: 128
Why not shove a digital camera in through an access port and take pictures. You can tape it to a PVC electrical tube and use the self timer to get at nasty spots. You may need 50 attempts, but you will then have a good idea of what you are dealing with.
That's what I always do before attempting to use a chisel, saw or angle grinder etc.
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.