Hey I need a traveler cam cleat for my 5.2 Any suggestionS?
--
Nacra 5.2
--
Traveller cleat
-
- Rank: Mate
- Registered: May 29, 2010
- Last visit: Apr 28, 2015
- Posts: 454
Posted: Aug 18, 2010 - 10:05 PM
-
- Rank: Mate
- Registered: Feb 25, 2007
- Last visit: Jul 13, 2012
- Posts: 414
Posted: Aug 18, 2010 - 10:19 PM
I think my boat uses a Harken 150
West Marine. http://www.westmarine.com…Num=10191&classNum=10239
Here are all the specifications. http://www.harken.com/Cat…mplementary-cam_kits.pdf
edited by: skarr1, Aug 18, 2010 - 09:27 PM -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Aug 18, 2010 - 11:26 PM
I have the older shiny metal toothed one, and I couldn't find a cleat to fit. I took my old one apart and cleaned it as best I could. It improved considerably, but still isn't as nice a harken cam cleat.
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Dec 04, 2024
- Posts: 7090
Posted: Aug 19, 2010 - 09:18 AM
often it's just a single little spring inside that has broken. recently i had to replace both springs in my trav/cleat
total cost. $.60
-
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Aug 19, 2010 - 10:09 AM
Hey Andrew, I just noticed mine was not holding as well as it used to, (25th day on my boat this season) it sometimes slips the line, especially if wet.
I didn't look really closely, as I had to pack up the cottage & run out to Calgary to pick up my brother & kids. It did seem that one cleat was moving all the way in, the other very little. This leads me to believe that perhaps mine suffers from a broken spring.
Where did you get the replacements? I think there was a thread 6 months ago about this, did you Mcgyver a spring, or can you get actual replacements?
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Dec 04, 2024
- Posts: 7090
Posted: Aug 19, 2010 - 11:50 AM
our local repair guy stocks the springs. not sure where else besides harken or murrays to get one (not sure about murrays).
if you can't locate one i would be happy to get and mail you one or 2. these weigh nothing and i would simply throw them in an envelope (not the $30 in shipping we ran into with the fids) -
- Rank: Mate
- Registered: Sep 05, 2004
- Last visit: Oct 19, 2015
- Posts: 327
Posted: Aug 19, 2010 - 01:31 PM
Andrew..
Not a traveller but a my lower main sheet block arms lost their springs. Can I replace these? -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Dec 04, 2024
- Posts: 7090
Posted: Aug 19, 2010 - 01:52 PM
yup, same deal.. its probably a harken and you can simply remove the cleat part.. pry off the red backing and access the 2 springs.
when i said my trav/cleat broke... i actually meant main blocks... -
- Rank: Mate
- Registered: Sep 05, 2004
- Last visit: Oct 19, 2015
- Posts: 327
Posted: Aug 19, 2010 - 02:19 PM
Harken. I was pulling little bits of spring steel out of em this summer but they still sort of work. That will save me some green. Many thanks. -
- Rank: Mate
- Registered: May 29, 2010
- Last visit: Apr 28, 2015
- Posts: 454
Posted: Aug 19, 2010 - 11:15 PM
I have been looking and cannot find one with fitting 2.5 inches apart. I guess I will hace to buy a harken or ronstan and drill new wholes.
--
Nacra 5.2
-- -
- Rank: Mate
- Registered: Oct 19, 2006
- Last visit: Aug 16, 2017
- Posts: 613
Posted: Aug 22, 2010 - 05:07 PM
I have a spare traveler cam cleat, the old style with shiny metal cams if anyone is interested. Cams aregood, cam springs still strong.
--
TurboHobo
H14T
H16
P18
G-Cat 5.0
P16
-- -
- Rank: Mate
- Registered: May 31, 2010
- Last visit: Jun 21, 2017
- Posts: 280
Posted: Aug 22, 2010 - 05:33 PM
Turbo, how much for it??
I need to replace all old rigging on my hobie 14.
--
Tyler holmes
Panama city, FL
Boat whore
-- -
- Rank: Mate
- Registered: Oct 19, 2006
- Last visit: Aug 16, 2017
- Posts: 613
Posted: Aug 22, 2010 - 10:35 PM
I have no idea how much this traveler cam cleat with bullseye fairlead is worth, what do you think?
--
TurboHobo
H14T
H16
P18
G-Cat 5.0
P16
-- -
- Rank: Mate
- Registered: May 31, 2010
- Last visit: Jun 21, 2017
- Posts: 280
Posted: Aug 22, 2010 - 10:39 PM
I dont know, 10-20 bucks?
--
Tyler holmes
Panama city, FL
Boat whore
--
Users on-line
This list is based on users active over the last 60 minutes.