Anyone have an idea on how much tension or turns to set the ratchamatic for the load of my mainsail on the Nacra 5.5?
I just got the Harken 2630 and need some input the intial settings as it does not look like you can adjust them on the water.
edited by: fa1321, Aug 27, 2010 - 10:32 PM
Harken Triple Carbo Ratchamatic settings?
-
- Rank: Mate
- Registered: Apr 29, 2009
- Last visit: Apr 25, 2016
- Posts: 191
-
- Rank: Mate
- Registered: Apr 29, 2009
- Last visit: Apr 25, 2016
- Posts: 191
ATTENTION: E C Hilliard bust out the math like you did on my Adding Flotation to a Nacra post.
edited by: fa1321, Aug 27, 2010 - 10:36 PM -
- Rank: Mate
- Registered: Jan 14, 2004
- Last visit: Sep 25, 2024
- Posts: 866
I'm driving, I'm bored . . . .
The answer is turn the allen set screw all the way in and then back it off 1/4 turn. You will spend more time getting the sheeting angle right!
--
Philip
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
I'll defer to Philip, I never touched my ratchets, they seem OK, though I did read the paragraph on Harkens site regarding adjustment. It is under "manuals", though I think it only tells you what size allen wrench to use, & what direction to increase/decrease loads.
Why the sad face on your post? I'm sorry my flotation post did not serve the purpose I intended. Rather than just give you a number of what the flotation value of a pool noodle is, I attempted to dumb the math down, & teach you how to calculate it, along with a bit of background on the relationship between flotation/displacement. This will then allow you, & others with the same question to calculate, instead of guessing, the flotation value of many items that may be used inside a hull.
A little education goes a long way. If we give a man a fish we feed him for a day, if we teach him to fish we feed him for a lifetime.
Actually that may not be correct...teaching a man to fish usually means he learns to sit in a boat & drink beer all day
edited by: Edchris177, Aug 28, 2010 - 10:44 AM
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Apr 29, 2009
- Last visit: Apr 25, 2016
- Posts: 191
E C Hilliard
Dont be sorry it was an awesome post did not relize the guy was frowning saw the ??? and thought it was more of a puzzled face. I was thinking you had a math formula to figure the load of the sail that could help figure out how much tension to add to my new block. I was definately not poking fun at you if I gave you or anyone that impression I am sorry. Although I do like to take a stab at Andrew sometimes for fun!!! Lol!!! -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Fair enough. That sort of math would be way beyond me. I sailed my 5.7 for 6 days before I figured out that I had ratcheting blocks, but they were turned off! I moved the switch thingy to "ratchet", & life was good. I think as Philip alluded to, just begin with 1/4 turn & change things by 1/8 or 1/4 turn at a time til you find what you like.
We have 20 mph wind today & hot, so I'm sailing for 90 minutes, then coming dockside to add another layer of resin & cloth to the dagger board well of my Invitation. The morning was spent grinding & sanding. Seems some idiot, & I'm not pointing fingers or looking in the mirror, managed to hit the only rock in the bay at full speed with board fully down.
Why does everybody pick on Andrew, his avatar doesn't look like a scab?
edited by: Edchris177, Aug 28, 2010 - 03:28 PM
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Jan 14, 2004
- Last visit: Sep 25, 2024
- Posts: 866
Ed, you're probably confused. There are two different types of ratcheting blocks. fa1321 (nameless) was referring to the carbo ratchmatics. You probably have the classic blocks, which have an on/off switch, but no adjustment for the auto engagement. Back to my original recommendation. Turn it all the way in, then back off just a little bit (reason explained later). The intent is to get the carbo ratchamatic to disengage as soon as possible (go off ratchet) to allow free spinning of the sheave. With the spring turned all the way on, the ratchet still turns on very easily and prematurely, with a minimal load.
What is your name fa1321?
--
Philip
-- -
- Rank: Mate
- Registered: Apr 29, 2009
- Last visit: Apr 25, 2016
- Posts: 191
Thanks Philip!
My name is Floyd I just have not taken the time to add it to my signature. -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Thanks Floyd, glad to meet you.
You can also fill in your Profile by clicking on the Profile link in the left menu.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
--