I am the proud new owner of a hobie 18sx with wings, I live in Saskatchewan where summer is definitely over. I packed up my boat yesterday, I am wondering if anyone has a sugestion of what I could do to transport my boat to protect the wings from the mast.
Thanks
Hobie 18sx Wing Storage
-
- Rank: Lubber
- Registered: Sep 20, 2010
- Last visit: Sep 23, 2010
- Posts: 6
Posted: Sep 20, 2010 - 01:43 PM
-
- Rank: Mate
- Registered: May 09, 2009
- Last visit: Aug 14, 2024
- Posts: 686
Posted: Sep 20, 2010 - 11:21 PM
This is from the beachcats technical section. I did this for
my magnum wings. Cheap and works great.
http://www.thebeachcats.com/index.php?module=pictures&g2_itemId=11711
--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
-- -
- Rank: Mate
- Registered: Apr 24, 2005
- Last visit: Apr 18, 2023
- Posts: 709
Posted: Sep 21, 2010 - 10:11 AM
I did this also for my Magnum wings. I made them a little different but same basic principle. At the end I cut the T fitting open and put a piece of carpet on the inside of the PVC pipe to create little cradles for the wings. I think adjusted the angle of the PVC pipes so that the wing rested reasonably flat in the created cradle. Works great for trailering and storage. I need to build a new one since over the years one of the joints has cracked, but I dont trailer mine much anymore, so I haven't gotten to it.
--
Scott,
‘92 H18 w/SX wings
‘95 Hobie Funseeker 12 (Holder 12)
‘96/‘01/‘14 Hobie Waves
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Sep 21, 2010 - 05:33 PM
Marty, whereabouts in Saskabush are you sailing it, L Deifenbaker? I grew up in Alberta, on the edge of the Rockies. We used to go to water science parties in the Cypress Hills, & spent some time in ToonTown, that river would be plenty wide for Catsailing.
Sounds like these guys have solved your problem
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Lubber
- Registered: Sep 20, 2010
- Last visit: Sep 23, 2010
- Posts: 6
Posted: Sep 22, 2010 - 12:48 AM
I am in Prince Albert, Sail on Emma, Christopher and waskesiu lakes, and yes I bought some pipes with some ends, and wa la working well, I cut out the T's as well and for now put some foam there. What a great inexpensive idea.
Thanks
Marty -
- Rank: Mate
- Registered: Apr 24, 2005
- Last visit: Apr 18, 2023
- Posts: 709
Posted: Sep 22, 2010 - 10:33 AM
I used two little carpet samples they give you or sell for $1 at the Home Depot or Lowes. I got indoor/outdoor carpet samples. Glad to hear you build your solution already.
--
Scott,
‘92 H18 w/SX wings
‘95 Hobie Funseeker 12 (Holder 12)
‘96/‘01/‘14 Hobie Waves
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.