My 18 Foot sx18 is in my shop for winterization, I am wondering if anyone has some advice for getting one of them opened, the one that did open was very tight, lots of grit inside. I sprayed some sail cote lube spray and wd40 and will leave it overnight?????
Marty
Hobie 1sx
Hobie 16se
18 Foot Hobie Hull hatch Covers
-
- Rank: Lubber
- Registered: Sep 20, 2010
- Last visit: Sep 23, 2010
- Posts: 6
Posted: Sep 20, 2010 - 11:58 PM
-
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Sep 21, 2010 - 05:30 PM
Do you mean that the screw-in port won't turn?
It can be hard to get a good hold on those. Try warm water and also make sure your hull plug is out, you can get a vacuum going inside the hull that can make them hard to remove.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Sep 21, 2010 - 06:15 PM
Put the handle of a pair of pliers on slots. Then fasten vice grips to working end of pliers, push down hard & turn. Pete -
- Rank: Lubber
- Registered: Sep 20, 2010
- Last visit: Sep 23, 2010
- Posts: 6
Posted: Sep 22, 2010 - 12:52 AM
I lubricated the covers at the seams, left over night and got the last one off tonight, those hull will dry out nicely
Thanks
-
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
Posted: Sep 22, 2010 - 06:21 PM
Mine were always getting stuck. I sprays all the threads on the ports and covers down with sailkote this year and haven't had a problem since.
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.