I've got the parts & i realize that i'm going to need to get someone to do this for me. I'm looking for a boatyard or workshop that i can drop off my P16 rudder system to have the board replaced.
I'm in Philadelphia, Any ideas?
Need help installing a rudder blade in the Philly area.
-
- Rank: Lubber
- Registered: Sep 16, 2010
- Last visit: Jun 27, 2011
- Posts: 6
-
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
I would repost this question under the Tech Help forum, this particular area doesn't see as much traffic. There are quite a few active Prindle guys that should be able to help you there.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
liamp 16, man i'd love to fix you rudder but i'm in mississippi. i bought my education on p 16 rudders last summer and as long as one is correct or functioning you have a working model to go by. there is a slight learning curve but if you give it a go you will get it eventualy. if you are up to the task shoot me a pm and i will walk you through it. good luck!
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
-- -
- Rank: Lubber
- Registered: Sep 16, 2010
- Last visit: Jun 27, 2011
- Posts: 6
-
- Rank: Mate
- Registered: Feb 06, 2009
- Last visit: Jun 25, 2017
- Posts: 223
What part can't you do? Did you see this thread: http://thebeachcats.com/module-forum-viewtopic-topic-11643.html -
- Rank: Lubber
- Registered: Sep 16, 2010
- Last visit: Jun 27, 2011
- Posts: 6
Thanks Kenny. I have the parts. Just needed some advice. Coastrat has given me a lot of good info.