I'm on a quest to add a spinnaker to my Hobie 16. Does anyone actually have one of the newer spinnakers that comes from Europe?
I'm going to have Kelly-Hanson Sails make one for me and I really need the correct sizes, or confirm what I have:
Luff = 19.5 ft
Foot = 8.75 ft
Leach = 17.25 ft
The Hobie Europe site says 15 meters squared.
I'm not sure how they add that up.
Please help! I have bought the blocks and made an aluminum spinnaker pole, so I'm ready to order the sail. They have priced one at just under $300. That's a great price! I've spent just over $200 on what I have so far and will still need about another $150 worth of rigging and rope. I will make a midpole snuffer system for about $50, so I think the whole thing will cost about $700.
Here's some of my collection so far.
I can't wait to achieve this:
Hobie in Europe answered some of my questions except for the sail size.
I did find out the line lengths:(Converted from Meters)
Sheet 39'4" of 8mm or 5/16 rope
Halyard 69' of 5mm or 3/16" rope
Tack line 18'1" of 6mm or 1/4" rope
These sizes are for use with a midpole snuffer setup
Any help will be greatly appreciated!
Thanks,
Mike F.
Pearland, TX
Hobie 16 Spinnaker Size?
-
- Rank: Lubber
- Registered: Jun 21, 2007
- Last visit: Jan 18, 2011
- Posts: 3
-
- Rank: Mate
- Registered: Aug 11, 2010
- Last visit: Mar 19, 2018
- Posts: 424
Hello Mike,
Maybe this link will help setting it up. http://www.thewatersportscompany.com/catalog/hc16.php
And you could send them an email at info@hobiecat.nl about the size of the spi.
Since F18 is such a big class over here in europe, most diy guys buy a used F18 spi ,there's lots of them.
Grtz, Andre
--
Tornado (80's Reg White)
Prindle 18-2 (sold)
Dart 16 (hired and hooked)
13 mtr steel cutter (sold)
Etap 22, unsinkable sailing pocket cruiser.
Amsterdam, the Netherlands
-- -
- Rank: Mate
- Registered: May 31, 2010
- Last visit: Jun 21, 2017
- Posts: 280
One of the guy's that use to have a Hobie 16 by me used a F-16 spinnaker...and it worked.
--
Tyler holmes
Panama city, FL
Boat whore
-- -
- Rank: Lubber
- Registered: Jun 21, 2007
- Last visit: Jan 18, 2011
- Posts: 3
Thanks guys. Info@hobiecat.nl said they didn't know the size but that I could buy one from them...
I will have one made at Kelly Hanson in this size
Luff = 19.5 ft
Foot = 8.75 ft
Leach = 17.25 ft
Wish me luck!
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.