Hi I'm new to this forum so Hi to all.
I have recently aquired a tornado cat in need of TLC the forward deck on one hull has become detached and am looking for a suitable adhesive to rebond it.I have seen a polyurethane one part adhesive called Sikaflex 292 which is used in boat construction has anybody used it ? or should I stick with a 2 part epoxy ?
Thanks in anticipation Gordon
Rebonding the front deck on a Tornado
-
- Rank: Lubber
- Registered: Jan 16, 2011
- Last visit: Jun 28, 2011
- Posts: 5
Posted: Jan 16, 2011 - 02:06 PM
-
- Rank: Mate
- Registered: Jun 08, 2009
- Last visit: Aug 19, 2013
- Posts: 132
Posted: Jan 17, 2011 - 07:09 AM
It depends mostly on the boat being wood or fiber. fiber is just epoxy and some new mats in there.
Wood, hm, I have no experience there, but i know that epoxy and wood work very good together.
Edited by dichtbijzee on Jan 17, 2011 - 05:49 AM.
--
Stefan, Denmark.
H14,H16,P16,P18,SC17,N5.8
Team StaySail
http://www.staysail.eu
-- -
- Rank: Lubber
- Registered: Jan 16, 2011
- Last visit: Jun 28, 2011
- Posts: 5
Posted: Jan 18, 2011 - 12:15 PM
Thanks for the reply the hulls and decks are fibreglass construction and the Sikaflex is advertised as a bedding and construction adhesive I think it is used in original construction and for bedding of equipment on boats in general just wondered if anyone had any experience with it. -
- Rank: Mate
- Registered: Mar 25, 2002
- Last visit: Sep 27, 2012
- Posts: 187
Posted: Jan 18, 2011 - 03:15 PM
Epoxy, whether wood or 'glass.
Sikaflex isn't made for that type of adhesion - it's more of a sealant. You bed equipment in it, but it's not what is actually holding what is being bedded.
Epoxy. It's what's for dinner. -
- Rank: Lubber
- Registered: Jan 16, 2011
- Last visit: Jun 28, 2011
- Posts: 5
Posted: Feb 02, 2011 - 02:05 PM
Thats the Sikaflex-291 I believe the product I have (now) used Sikaflex-292 is designed as a structural bonding as opposed to sealing I HOPE !
If not its back to epoxy -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Feb 03, 2011 - 02:04 AM
Epoxy.
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Feb 03, 2011 - 07:25 PM
West epozy and then a piece of 2 inch glass bonded to deck then folded down to hull. Pete
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.