• spoulton
  
  

  • Rank: Mate
  • Registered: Dec 18, 2009
  • Last visit: Oct 10, 2019
  • Posts: 117

  Posted: Feb 22, 2011 - 10:45 PM

  Does anyone have any recommendations regarding where to buy a new P-18 trampoline? Also, how much time can I expect to spend putting on the new trampoline?
  
  --
  Scott
  ARC 21
  Prindle 18
  Annapolis, Maryland
  --

  • 
  •  
• twilliams.907
  
  

  • Rank: Lubber
  • Registered: Jan 26, 2011
  • Last visit: Oct 01, 2011
  • Posts: 14

  Posted: Feb 23, 2011 - 01:54 AM

  I just got done buying and installing a new trampoline on my Prindle 18 Monday. The tramp appears to be great quality and the installation by myself took about 90 minutes or so. Here is a link for their website, seemed like reasonable prices. http://www.slosails.com/prindle.php Let me know if you have any questions on installing the tramp; SLO has instructions on their website or they are in the owners manual for the boat.

  • 
  •  
• Quarath
  
  

  • Rank: Mate
  • Registered: Jul 06, 2008
  • Last visit: Jul 19, 2018
  • Posts: 986

  Posted: Feb 23, 2011 - 05:20 PM

  Did you get any extra pockets? If so take some pictures or just take some pictures anyway I am considering one myself and I like to see one installed
  
  --
  Dustin Finlinson • Magna, UT
  Member: Utah Sailing Association
  1982 Prindle 18
  1986 Hobie 17
  1982 Prindle 16
  1980 Prindle 16(mostly)
  1976 Prindle 16(mostly)
  Check out "Prindle Sailors" on Facebook.
  --

  • 
  •  
• kgatesman
  
  

  • Rank: Mate
  • Registered: Feb 06, 2009
  • Last visit: Jun 25, 2017
  • Posts: 223

  Posted: Feb 23, 2011 - 07:34 PM

  SLO made mine with two pockets, one for the righting line, the other for the halyards.
  It takes me about an hour, threading the sides is the part that sucks. Pulling it tight in the back takes three or four hands.

  • 
  •  
• uh
  
  

  • Rank: Lubber
  • Registered: Aug 10, 2010
  • Last visit: Nov 25, 2012
  • Posts: 58

  Posted: Feb 23, 2011 - 09:39 PM

  I got a P19 tramp last fall from SLO. Ordered the black bias-cut model and optional teflon thread and extra pocket. Got the tramp about a week after ordering. Fit is perfect. Love how the bias-cut only requires tightening along the rear beam.
  
  Installation was easy and took a relaxed hour. With the bias cut you pull both sides towards the rear at the same time. So it was pull a couple inches, go to other side, pull a couple inches, go back to other side, repeat.
  
  Here is a facebook link to the picture :
  http://www.facebook.com/p…et=o.14527964497&theater
  
  There is a thread on here about SLO customer service with a custom made tramp. It had me wondering about SLO, but personally I was very happy with the quality and price.
  
  --
  Uwe
  94 Prindle 19 - "überKat"
  DFW, TX
  --

  • 
  •  
• kgatesman
  
  

  • Rank: Mate
  • Registered: Feb 06, 2009
  • Last visit: Jun 25, 2017
  • Posts: 223

  Posted: Feb 24, 2011 - 08:06 PM

  Not tightening the sides is a huge feature, if I knew this I probably would have gone that way.

  • 
  •  
• Quarath
  
  

  • Rank: Mate
  • Registered: Jul 06, 2008
  • Last visit: Jul 19, 2018
  • Posts: 986

  Posted: Feb 28, 2011 - 03:47 PM

  kgatesman

  Not tightening the sides is a huge feature, if I knew this I probably would have gone that way.

  
  his is p-19 though they go on a little differently than a p18. They have tracks on the sides I think. I'm afraid we're stuck with lacing he little side tabs still.
  
  --
  Dustin Finlinson • Magna, UT
  Member: Utah Sailing Association
  1982 Prindle 18
  1986 Hobie 17
  1982 Prindle 16
  1980 Prindle 16(mostly)
  1976 Prindle 16(mostly)
  Check out "Prindle Sailors" on Facebook.
  --

  • 
  •  
• kgatesman
  
  

  • Rank: Mate
  • Registered: Feb 06, 2009
  • Last visit: Jun 25, 2017
  • Posts: 223

  Posted: Mar 01, 2011 - 07:22 PM

  The only thing worse than dealing with the laces is replacing the rudder up and down haul.

  • 
  •  
• uh
  
  

  • Rank: Lubber
  • Registered: Aug 10, 2010
  • Last visit: Nov 25, 2012
  • Posts: 58

  Posted: Mar 02, 2011 - 01:24 AM

  Oops, thanks Quarath, I forgot that the 18 had the lacing. But I'm still happy with SLOs tramp.
  
  --
  Uwe
  94 Prindle 19 - "überKat"
  DFW, TX
  --

  • 
  •  
• Quarath
  
  

  • Rank: Mate
  • Registered: Jul 06, 2008
  • Last visit: Jul 19, 2018
  • Posts: 986

  Posted: Mar 02, 2011 - 04:53 PM

  kgatesman

  The only thing worse than dealing with the laces is replacing the rudder up and down haul.

  
  just tape a piece of 1/8 in to the end of the bigger line and pull the 1/8th around as a leader. Or if your really fancy you could put a tapered splice from the 1/8th to the 3/16
  
  --
  Dustin Finlinson • Magna, UT
  Member: Utah Sailing Association
  1982 Prindle 18
  1986 Hobie 17
  1982 Prindle 16
  1980 Prindle 16(mostly)
  1976 Prindle 16(mostly)
  Check out "Prindle Sailors" on Facebook.
  --

  • 
  •  
•  
•  

Users on-line

• 0 users

This list is based on users active over the last 60 minutes.