--
Bruce Henry
Lithonia and Lakemont, Georgia
82 Hobie 16
--
H 16 Hull repairs
-
- Rank: Lubber
- Registered: Feb 18, 2011
- Last visit: Aug 24, 2011
- Posts: 21
Posted: Mar 15, 2011 - 02:06 PM
An H 16 I'm considering has some hull damage as can be seen from the attached photos. Would the West System epoxies be the best way to make repairs? The cracks are not all the way through the hull.
--
Bruce Henry
Lithonia and Lakemont, Georgia
82 Hobie 16
-- -
- Rank: Mate
- Registered: Apr 29, 2009
- Last visit: Apr 25, 2016
- Posts: 191
Posted: Mar 15, 2011 - 04:45 PM
If you can pick the boat up cheap enough it would be worth a shot. That is a hight stress area but you would be amazed some of the stuff the Hobie guys repair. I would post this on the Hobie Cat forums and maybe someone can tell you how to fix it. They may have done an article on it in one of the Hotlines check here http://2010.archive.hobiecat.com/hobieclass/ -
- Rank: Lubber
- Registered: Apr 28, 2010
- Last visit: Jul 22, 2017
- Posts: 69
Posted: Mar 15, 2011 - 07:04 PM
I agree. Transom repairs are usually not easy but very doable. There is even a current thread on this topic on the Hobie Cat Forum.
http://www.hobiecat.com/f…ewtopic.php?f=14&t=34381
--
Dave Wilson
Hobie 16, Hobie 14
Tampa, FL
--
Users on-line
This list is based on users active over the last 60 minutes.