Just bought an old Prindle 16 - I think 1994 - the rudder lines are frayed to a string. I cannot figure out how they lead inside the tiller. There seems to be a small block inside the tiller itself - knotted under the tiller and a 2:1 on the pull bar (to pull up)
anyone have a diagram or instructions on how to replace these lines? thanks - Jon
--
Jon
--
prindle 16 replacement of rudder lines
-
- Rank: Lubber
- Registered: Jun 14, 2006
- Last visit: May 30, 2020
- Posts: 2
Posted: Apr 25, 2011 - 12:35 PM
-
- Rank: Mate
- Registered: Feb 25, 2007
- Last visit: Jul 13, 2012
- Posts: 414
Posted: Apr 25, 2011 - 01:33 PM
Right here on this site. http://www.thebeachcats.c…ictures/?g2_itemId=75669
Rudders start on page seven but I don't think this is what you nead.
Edited by skarr1 on Apr 25, 2011 - 02:53 PM. -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Oct 31, 2024
- Posts: 3445
Posted: Apr 25, 2011 - 03:37 PM
Do these two pages from the manual help? I think there may be other methods to do this but this should be the stock method on your Prindle 16. Hopefully some of our resident Prindle 16 experts will show up.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
Posted: Apr 25, 2011 - 09:24 PM
use 3/16" line, 1/4" is too big. here's what i did: if you have one side working good then do the other side just like it...in other words, do one side at a time so you have something to go by. the main thing is to run the line on either side or the tiller crossbar bolt. this is the biggest learning curve on a prindle without a doubt. after working with it for a while it makes sense but make sure to only break down one side at a time. do the other side a mirror image of the first side. good luck!
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.