Delam?
-
- Rank: Lubber
- Registered: May 02, 2009
- Last visit: Dec 26, 2013
- Posts: 25
How important is delam under the tramp? I did some delam repairs on the front of hulls but kinda didnt want to have to take tramp off to do underneath. If I need to then I need to so let me know. Thanks -
- Rank: Mate
- Registered: Apr 26, 2004
- Last visit: Nov 05, 2024
- Posts: 399
~~ If ya have time.... fix it, also how bad is it ?? I know it's a pain in the ass to get to things, trust me I know I've worked on plenty of my Hobies... paintin / patchin ETC ETC....... Get it done then it's done !!!
--
~ Vietnam Vet 69-71~ 17 Hobie w/big jib, ~18 Hobie mag,~DN Ice sailor,
and other toys.......
~~ I live in NY state on the north shore of Oneida lake in
Bernhards Bay. ~~~~~~
-- -
- Rank: Lubber
- Registered: Apr 28, 2010
- Last visit: Jul 22, 2017
- Posts: 69
Yep. As popeyez7 says, fix it. Delamination is a structural issue and shouldn't be ignored. Catastrophic hull failure is no fun and can be dangerous.
http://www.hobiecat.com/f…iewtopic.php?f=18&t=1156
--
Dave Wilson
Hobie 16, Hobie 14
Tampa, FL
-- -
- Rank: Lubber
- Registered: May 02, 2009
- Last visit: Dec 26, 2013
- Posts: 25
Yea I thought that would be the case. Its pretty bad. The left hull pretty much the whole part under the tramp. I did the front of the hull which turned out good so it shouldnt be a problem once I get the tramp off. Whats the best way about taking the tramp off? Does it just unbolt there and pop off or is it more complicated than that?
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.