Nacra 6.0NA rigging
-
- Rank: Lubber
- Registered: May 19, 2010
- Last visit: Apr 28, 2011
- Posts: 2
Posted: Apr 28, 2011 - 08:56 AM
Does anyone have an pictures or drawings of the barber hauler and mast rotation setup on the Nacra 6.0NA they can share? I have the Nacra manual, but the pictures are really bad. Thanks for any info. -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Apr 28, 2011 - 10:20 AM
Post some pictures of what you have and I will help you. Setups are different so I need to see what you have.
Ron
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: Apr 28, 2011 - 10:25 AM
I believe it is almost he same as a 5.7, check out ECs photos here:
http://www.thebeachcats.c…ictures/?g2_itemId=71715 they may help you with the rotation control.
Barberhauler should be similar to mine here:
http://www.thebeachcats.c…ictures/?g2_itemId=74145
Although Nacra had a couple of variations on that system.
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Lubber
- Registered: May 19, 2010
- Last visit: Apr 28, 2011
- Posts: 2
Posted: Apr 28, 2011 - 11:23 AM
Ron
My main beam fittings match the photos by Wolfman, but beyond that, all rigging for the barber haulers and rotation was removed by the PO. I guess that leave me a clean slate! Mostly I am looking for ideas on how it was done in the past before I reinvent the wheel.
Wolfman
Thanks for the pics, these help a lot!
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.