When I am sailing fast on my Prindle my left rudder seems to be unlocking and coming up. Is there something I can do to fix this?
--
Alex
Prindle 16 "Shake & Bake"
Portland, Oregon
--
P16 Rudder lock
-
- Rank: Lubber
- Registered: Jun 12, 2011
- Last visit: Oct 23, 2011
- Posts: 47
-
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
the best thing you can do for your p-16 is to balance the helm and adjust the rudders by the book...once you have the pitch/tow and rake adjusted for the slight weather helm and the rudder still pops up then it's either worn out springs or vary likely bent/worn out lock down bolt. the springs are cheap, the bolts are 30$ each...ouch... also go through the process of taking the slop out of them(nylon fender washers in the castings). i have made a few sets of bolts from the identical ss carriage bolts i found at my local fastenall store. it takes a 4" angle grinder, a round file, and a flat file, safety glasses, and about 15 minutes. after i installed them, i spent a few minutes easing off the excess metal to get the release tension i liked. once you get the rudders right like you like them, they are a piece of cake!
Edited by coastrat on Jul 11, 2011 - 07:10 AM.
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
-- -
- Rank: Lubber
- Registered: Jun 12, 2011
- Last visit: Oct 23, 2011
- Posts: 47
Let me look into it more and find out what part is worn. Thanks Bill
--
Alex
Prindle 16 "Shake & Bake"
Portland, Oregon
-- -
- Rank: Mate
- Registered: Oct 19, 2006
- Last visit: Aug 16, 2017
- Posts: 613
Alex, had the same problem on my P18, easy fix, the locking bolt is adjustable and it's this adjustment that "latches" the locking bolt harder or softer, it alters the angle of the locking bolt onto the latching arm . Just shorten the locking bolt untill required strength of latch is achieved, you can check it manually by dropping the rudder down into the lock position, then pull rudder to check strength of lockdown.
turbo
--
TurboHobo
H14T
H16
P18
G-Cat 5.0
P16
-- -
- Rank: Mate
- Registered: Jun 09, 2011
- Last visit: Sep 04, 2017
- Posts: 109
Thanks Turbo, that answers a question I had also. I want to sail in Matagorda Bay and there are a lot of shallow areas there so I wanted to make sure my rudders would break away easily.
--
Mike Brady
Sugar Land, TX
Sailing off Magnolia Beach in Lavaca Bay TX
http://358degrees.blogspot.com/
P16 "Pooh Cat"
-- -
- Rank: Mate
- Registered: Oct 19, 2006
- Last visit: Aug 16, 2017
- Posts: 613