My recent purchase (P16) came with a nice set of sails. It does seem that the boat got knocked over in some petroleum waste though. Not a lot, but enough small tar balls on the sails to be annoying. Any ideas on what might remove/reduce those? It's a real nice set of sails, apart from that.
It's on both sides, and more toward the top of the rig. Blue on the bottom is clean. Makes me think it got dumped in the Gulf during the D/H thing. Anybody have any luck removing tar from sails?
By the way, thanks for all the info, it's priceless.
--
Mike Brady
Sugar Land, TX
Sailing off Magnolia Beach in Lavaca Bay TX
http://358degrees.blogspot.com/
P16 "Pooh Cat"
--
Get tar off sails
-
- Rank: Mate
- Registered: Jun 09, 2011
- Last visit: Sep 04, 2017
- Posts: 109
Posted: Jul 19, 2011 - 08:25 PM
-
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Jul 19, 2011 - 11:34 PM
I've never used it on sails, but have used WD40 to remove tar from all kins of things, including my skin. So I would think it would be safe for sails, but maybe test it on one spot. Afterwards I'd clean the whole sail with OxiClean, I've washed dacron sails by simply laying them out in the (concrete) driveway, hosing down, then lightly scrubbing with a strong solution of OxiClean and then a good rinse.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Mate
- Registered: Apr 15, 2011
- Last visit: Jul 04, 2019
- Posts: 287
Posted: Jul 20, 2011 - 01:09 AM
dishwashing soap should work unless it has some solids in it
Edited by matt922 on Jul 20, 2011 - 01:11 AM. -
- Rank: Mate
- Registered: Oct 19, 2006
- Last visit: Aug 16, 2017
- Posts: 613
Posted: Jul 20, 2011 - 09:00 AM
use the dishwash soap they use for removing oil from wildlife....? I forget the brand
--
TurboHobo
H14T
H16
P18
G-Cat 5.0
P16
-- -
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: Jul 20, 2011 - 09:34 AM
Dawn.
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Mate
- Registered: Jun 09, 2011
- Last visit: Sep 04, 2017
- Posts: 109
Posted: Jul 20, 2011 - 10:36 AM
Sounds reasonable, if it can clean up an oiled Egret it ought to get tar off a sail. The sails look really good and if I can get the majority of the spots off or at least minimized it would be very nice.
--
Mike Brady
Sugar Land, TX
Sailing off Magnolia Beach in Lavaca Bay TX
http://358degrees.blogspot.com/
P16 "Pooh Cat"
-- -
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
Posted: Jul 20, 2011 - 02:01 PM
this past winter i had my sails restored @ sail care. there were rust stains, hydraulic fluid, chicken grease, mildew, and a few unidentifyable ones on them. they dryclean them then do a 3 part process of a mildercide, uv protec, and water proofing...a process they call lamanuay(?). they also did a number of sail repairs. they turned out real good...as like new as a set of 33yr old sails can be. it's not cheap, i spent 425$, but the before and after is amazing, they were rough.
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
-- -
- Rank: Mate
- Registered: Jun 09, 2011
- Last visit: Sep 04, 2017
- Posts: 109
Posted: Jul 20, 2011 - 03:20 PM
I am going to try Dawn first. If I still have a lot of black spots I may give sail care a shot this winter. The sails are in pretty good shape overall, cleaning would be pretty much all they would need. Do you remember how much of the $425 was cleaning?
--
Mike Brady
Sugar Land, TX
Sailing off Magnolia Beach in Lavaca Bay TX
http://358degrees.blogspot.com/
P16 "Pooh Cat"
-- -
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
Posted: Jul 20, 2011 - 05:48 PM
i think the clean/re-resin part was about 130$ add 65$ if you want to keep on old sail numbers(they sew them on because glued ons will come off during treatment), shipping was about 14$ each way.
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Jul 20, 2011 - 07:37 PM
Damons idea works, I've done it with large tarps. However for tar, I would modify the approach. Tar has a nasty habit of smearing around, what started as a 1" blob, quickly grows to 1 foot!
Use something like Goof Off, or rubbing alcohol, & spot clean each glob of tar. You cuold even tape around them so they cannot smear onto other parts of the sail. Once you get the individual areas clean, then go for the whole burrito. This just might save you some grief.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Jun 09, 2011
- Last visit: Sep 04, 2017
- Posts: 109
Posted: Jul 20, 2011 - 08:04 PM
You are correct, 5 minutes with Goof Off and i had diminshed the spot, but it is now a larger dull stain. Methinks I will sail what I got till winter and then bundle them up and send them off. I looked at the web site for sail care, works for me.
--
Mike Brady
Sugar Land, TX
Sailing off Magnolia Beach in Lavaca Bay TX
http://358degrees.blogspot.com/
P16 "Pooh Cat"
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.