I was trailering my 16, mast hit a overhanging branch, pulled mast back, port hull broke almost in two in front of the pylon. I am looking for a new hull, but hard to find one in Wyoming. Is there ANY possibility of repairing this?
I know there will be more weight from the repair, but I am primarily concerned about shearing it off in the water.
Thanks,
A
can a front hull on a 16 that is allmost broken off be repaired?
-
- Rank: Lubber
- Registered: Jul 27, 2008
- Last visit: Oct 09, 2011
- Posts: 8
Posted: Jul 21, 2011 - 09:14 PM
-
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: Jul 21, 2011 - 10:21 PM
Unlikely, that is the highest stress area of the boat. And once you have 2/3 of the hull torn around the circumfrence it is unlikely any patch will hold. Post a want ad on here. Those hulls are pretty common. And if it is one hull you may even be able to ship it freight for a reasonable price. Hell look around you local sailing area, you may find one or two sitting in peoples yards that haven't been moved in 20 years (I know of 3 on my lake and I live 500 miles from nowhere). You may get a whole boat for the price of a hull.
D.
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Mate
- Registered: Apr 29, 2009
- Last visit: Apr 25, 2016
- Posts: 191
Posted: Jul 22, 2011 - 07:01 AM
Just plan a vacation around picking up your new boat! -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Jul 25, 2011 - 07:47 AM
You are in Wyoming, this is a bit of a drive, but you might get them cheap.
http://lansing.craigslist.org/for/2508535315.html
Edited by Edchris177 on Jul 25, 2011 - 07:48 AM.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.