Got blocks?
-
- Rank: Lubber
- Registered: Jun 17, 2011
- Last visit: Jul 25, 2011
- Posts: 3
Posted: Jul 24, 2011 - 09:24 PM
Well, my project H16 is 99% done, I stepped the mast and figured out how to raise the sails in the backyard yesterday. The boat came with a single boom block, and a single ratchet block on the traveler. I have been looking around for a main sheet blockset on the cheap. All I need is the stock setup, or ANYTHING to get me on the water. If you upgraded, and have an old set laying around, maybe we can work something out!! -
- Rank: Mate
- Registered: Oct 19, 2006
- Last visit: Aug 16, 2017
- Posts: 613
Posted: Jul 24, 2011 - 10:00 PM
http://www.thebeachcats.c…ictures/?g2_itemId=63029
if what you have looks anything like the old H16 setup as above with 4:1 Seaway blocks, go ahead and use it untill you can get your hands on something else/better.
--
TurboHobo
H14T
H16
P18
G-Cat 5.0
P16
-- -
- Rank: Lubber
- Registered: Jun 17, 2011
- Last visit: Jul 25, 2011
- Posts: 3
Posted: Jul 24, 2011 - 10:24 PM
Unfortunately, I am missing 2 of the blocks. I do not have the double block that attaches to the ratchet, and I only have 1 block on my boom. -
- Rank: Mate
- Registered: Oct 19, 2006
- Last visit: Aug 16, 2017
- Posts: 613
Posted: Jul 25, 2011 - 07:04 AM
try contact Dave of Presailed Parts, you will find him under the classifieds tab on top, go to catamaran parts for sale and either send seller a message or leave a post.
--
TurboHobo
H14T
H16
P18
G-Cat 5.0
P16
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.