• lakewateree
  
  

  • Rank: Mate
  • Registered: Oct 31, 2010
  • Last visit: Oct 24, 2024
  • Posts: 195

  Posted: Aug 29, 2011 - 07:27 PM

  The carpet material has disappeared from one of the cradles on my cat trax. Is there a preferred material to use on them?
  
  --
  Mac
  Midlands South Carolina
  AHPC Viper USA 366
  A Cat USA 366
  Super Cat 17
  --

  • 
  •  
• ericweller
  
  

  • Rank: Lubber
  • Registered: Sep 24, 2009
  • Last visit: May 17, 2019
  • Posts: 96

  Posted: Aug 29, 2011 - 08:56 PM

  We are using a rubberized foam pad. When the pad gets slightly wet, the boat sticks to the cradles so that we don't have to tie the boat to the wheels. Once the boat is in the water, the cradles slide off the hulls quite easily. Our cradles were modified to conform exactly to hull shape to maximize the hull pad contact.

  • 
  •  
• lakewateree
  
  

  • Rank: Mate
  • Registered: Oct 31, 2010
  • Last visit: Oct 24, 2024
  • Posts: 195

  Posted: Aug 30, 2011 - 04:00 AM

  Where would you find foam padding?
  
  --
  Mac
  Midlands South Carolina
  AHPC Viper USA 366
  A Cat USA 366
  Super Cat 17
  --

  • 
  •  
• arch
  
  

  • Rank: Mate
  • Registered: Jan 25, 2004
  • Last visit: Apr 06, 2021
  • Posts: 267

  Posted: Sep 13, 2011 - 09:59 PM

  try indoor-outdoor carpet from menards. on sale a 5x9 roll was $10. it has a rubbery backing that makes it work great with contact cement.
  this carpet also works well inside a daggerboard trunk to provide friction. a little bit at the front and rear works well. don't make the mistake i did and line the trunk all the way around the top and bottom cause you'll never be able to move the daggerboard!
  
  --
  Aquacat 12 (sold)...'87 Nacra 5.8 (sold)...'03 Nacra Inter18 (sold)
  Venture 15 (sold)....'89 Nacra 5.8 (sold)...'91 Nacra 5.8NA (sold)
  '99 Nacra Inter20 (sold)
  --

  • 
  •  
• KennyB
  
  

  • Rank: Mate
  • Registered: Nov 16, 2002
  • Last visit: Jul 04, 2020
  • Posts: 139

  Posted: Sep 14, 2011 - 06:47 AM

  Try this site: http://kayak.nrsweb.com/boating/Closed%20Cell%20Foam
  
  --
  Kenny Boudreaux
  2010 C2 F18 USA 323
  Goodall Design "Southern Area Rep"
  Owner of Sailboxes.com
  --

  • 
  •  
• ericweller
  
  

  • Rank: Lubber
  • Registered: Sep 24, 2009
  • Last visit: May 17, 2019
  • Posts: 96

  Posted: Sep 14, 2011 - 10:47 AM

  I was able to locate the rubberized foam. Try Jill Nickerson from Fun in the Sun at http://www.funinthesunweb.com. That is where I was able to purchase it although I cannot remember the cost.

  • 
  •  
• Quarath
  
  

  • Rank: Mate
  • Registered: Jul 06, 2008
  • Last visit: Jul 19, 2018
  • Posts: 986

  Posted: Sep 14, 2011 - 10:54 AM

  lakewateree

  Where would you find foam padding?

  
  
  
  Go to Walmart and buy the cheap Walmart camp pad made of closed cell foam. This is stuff is durable in the elements and can be easily cut to shape and size you need. less than $10
  
  
  
  Edited by Quarath on Sep 14, 2011 - 10:56 AM.
  
  --
  Dustin Finlinson • Magna, UT
  Member: Utah Sailing Association
  1982 Prindle 18
  1986 Hobie 17
  1982 Prindle 16
  1980 Prindle 16(mostly)
  1976 Prindle 16(mostly)
  Check out "Prindle Sailors" on Facebook.
  --

  • 
  •  
• lakewateree
  
  

  • Rank: Mate
  • Registered: Oct 31, 2010
  • Last visit: Oct 24, 2024
  • Posts: 195

  Posted: Sep 14, 2011 - 02:25 PM

  Thanks, I like $10 solutions. I ended up finding the carpet thAt was on my cradle and reattached it with contact cement. The cradles on my tailor are getting worn, so I might try the foam on those in the future.
  
  --
  Mac
  Midlands South Carolina
  AHPC Viper USA 366
  A Cat USA 366
  Super Cat 17
  --

  • 
  •  
•  
•  

Users on-line

• 0 users

This list is based on users active over the last 60 minutes.