So being a bit lazy and clumsy and not as agile as I was when I was 65.. Saw a tip in a forum here to place a U shaped bracket (like the one that is the pivot for a Hotstick attached to the crossbar) out near the outboard end of the rudder cross bar to hold the hotstick when swinging it around during tack. If one is good is two better?? How about installing a second hotstick and U bracket.. After starting the tack as you change sides slip the windward one in the bracket and leave it behind. Move to the other rail and pick up the second hotstick and away ya go.. No more droping the darn thing aft or getting it caught in a line or on the boom.. It is nice and neat ready to be picked up and extended.. Class legal ?? Just a thought from a lazy sailer..Cheers Hal
--
Hal Liske
Livermore CA
H 16 (6+ 1.. Friends) H 3.2 N 5.2 (2) H 17 (2) H-18
Nacra 5.8 (son's) H 20 (Friends)
It's a Sickness
I Need a A Cat Please
--
2 tillers.. one boat ??
-
- Rank: Mate
- Registered: Aug 13, 2010
- Last visit: Mar 10, 2014
- Posts: 294
Posted: Aug 31, 2011 - 02:19 PM
-
- Rank: Mate
- Registered: Jun 17, 2011
- Last visit: Sep 24, 2023
- Posts: 783
Posted: Aug 31, 2011 - 03:07 PM
Well with the extension that I use mine at, it means the unused side would be digging in the water and slowing me down which is counter productive to my fun.
--
Greenville SC
Offering sails and other go fast parts for A-class catamarans
-- -
- Rank: Mate
- Registered: Aug 13, 2010
- Last visit: Mar 10, 2014
- Posts: 294
Posted: Aug 31, 2011 - 03:40 PM
I use the glass extendable one which would retract to be even with the lee side of the hull..
--
Hal Liske
Livermore CA
H 16 (6+ 1.. Friends) H 3.2 N 5.2 (2) H 17 (2) H-18
Nacra 5.8 (son's) H 20 (Friends)
It's a Sickness
I Need a A Cat Please
-- -
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
Posted: Aug 31, 2011 - 04:13 PM
or better yet
http://www.intl-fiberglass.com/cheshire.php
I have considered this myself but to the point of actually making i happen. For starters you double you cost for a good retractable hotstick.
They also make a tiller return
http://www.intl-fiberglass.com/tiller.php
Edited by Quarath on Aug 31, 2011 - 04:18 PM.
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Aug 31, 2011 - 06:35 PM
The downside of photo #1 Dustin, you could never hike, it's way to short.
There is an album somewhere here that shows how a felow riggerd up two tillers, i'll see if I can find it.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Dec 04, 2024
- Posts: 7090
Posted: Sep 01, 2011 - 07:10 AM
looks like a hazard to me -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Sep 01, 2011 - 09:20 AM
Here it is, scroll down past the monohull. There are a few other ideas here people may find useful.
http://steve.skybeach.org…iling_files/sailing2.htm
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Sep 01, 2011 - 09:23 AM
Crap, that was post 666, & I spend lots of time in China...might be bad karma, so I had to post again. Maybe Damon can rig the site like a high rise, no 13th floor. In China, the big buildings would never have an address of 666, way to much bad s#$t might happen, & nobody would buy the place.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
Posted: Sep 01, 2011 - 12:12 PM
#1 could work if each side was a tad shorter and could telescope individually so like halliske said you could bring one in as you co through your tack/gybe then pull the other out on the other side. The boat those are on I think is marketed as a beginner small sailing boat and may not even have traps.
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.