hertinbertin
Really good point. On my boat the rudders work best with 2-3 mm of toe-in. I got tired of having to mark the rudders with grease pencil every time I checked the measurement, so I have masked off the waterline on the rudders with tape and will paint a permanent pinstripe with which to measure.
Sheet In!
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
--