Hi All,
Can anyone tell me the diameter of the P16 Prindle shroud anchor bar? It looks like 1/2" but that's too big right?
pics here:
http://www.murrays.com/mm5/graphics/00000001/50-50101701.jpg
http://www.murrays.com/mm5/graphics/00000001/56-1014.jpg
Damien
P16 Prindle Shroud anchor bar size
-
- Rank: Lubber
- Registered: Sep 05, 2011
- Last visit: Aug 19, 2013
- Posts: 24
Posted: Sep 05, 2011 - 03:03 PM
-
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
Posted: Sep 06, 2011 - 02:25 PM
I cant be absolutely certain but 1.2 is way to big probably 3/18 but I'd have to measure. Search Prindle on Murrays so you make sure you are seeing the one for prindle. I am pretty sure the ends are not rounded like that.
Edited by Quarath on Sep 06, 2011 - 02:26 PM.
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
-- -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Sep 06, 2011 - 03:57 PM
1/2 " same as H-16 Pete -
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
Posted: Sep 07, 2011 - 10:49 AM
Wow good to know. I have a couple loose ones in a box at home and I sure don't remember them seeming that thick, but I guess the bolts going in them are fairly large so they would need to be.
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
-- -
- Rank: Lubber
- Registered: Sep 05, 2011
- Last visit: Aug 19, 2013
- Posts: 24
Posted: Sep 07, 2011 - 08:25 PM
Thanks all - very helpful
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.