Hobie 18 spinnaker snuffer ring?
-
- Rank: Lubber
- Registered: Sep 12, 2011
- Last visit: Jul 01, 2014
- Posts: 10
Posted: Sep 12, 2011 - 11:20 PM
Where can I buy a spinnaker snuffer ring and bag for my hobie 18? I would like to try and find a stainless steel one but I have no luck so far? -
- Rank: Mate
- Registered: Apr 15, 2005
- Last visit: Feb 21, 2024
- Posts: 574
Posted: Sep 13, 2011 - 06:13 AM
There is no specific snuffer ring/bag setup for a H18. Keep that in mind. You have a few options:
1) Find a used one-I got a ring and bag, plus a bunch of other gear for $200
2) Buy a Nacra or Hobie F18 ring and bag, total $500 (ring alone is like $250)
3) Buy a SNU ring and bag, also >$500
4) Get in touch with an AHPC dealer and see what they'll do for you, they make an aluminum ring.
If you can find a ring for ~$100, you could sew the bag yourself for cheap. Keep in mind that the spinnaker alone could easily run you >$500 depending on exactly what you manage to find. -
- Rank: Mate
- Registered: Apr 15, 2005
- Last visit: Feb 21, 2024
- Posts: 574
Posted: Sep 13, 2011 - 06:14 AM
There is no specific snuffer ring/bag setup for a H18. Keep that in mind. You have a few options:
1) Find a used one-I got a ring and bag, plus a bunch of other gear for $200
2) Buy a Nacra or Hobie F18 ring and bag, total $500 (ring alone is like $250)
3) Buy a SNU ring and bag, also >$500
4) Get in touch with an AHPC dealer and see what they'll do for you, they make an aluminum ring.
If you can find a ring for ~$100, you could sew the bag yourself for cheap. Keep in mind that the spinnaker alone could easily run you >$500 depending on exactly what you manage to find. -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Sep 13, 2011 - 11:42 AM
Get a snu! Will be my next unit
making a sock is a tricky task. if you are a seamstress i guess it's easy but i have seen some terrible home-made ones (from guys who know how to sew) I have also seens ome decent ones.
I have a AHPC ring/sock works well. they are pricey.
If you want to talk with a dealer.. PM me for Jill Nickerson contact info (they are the South USA dealers) -
- Rank: Lubber
- Registered: Sep 12, 2011
- Last visit: Jul 01, 2014
- Posts: 10
Posted: Sep 13, 2011 - 08:32 PM
Is there any why I could make one? Or has that ever been done before? -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Sep 14, 2011 - 07:19 AM
we sailed with a guy who had a pvc homemade hoop, and the worst looking mesh sock you have ever seen. It looked like a toilet bowl and he got a lot of grief over it... however it worked and he used it till he shredded his spin.
Edited by MN3 on Sep 14, 2011 - 07:21 AM. -
- Rank: Lubber
- Registered: Sep 12, 2011
- Last visit: Jul 01, 2014
- Posts: 10
Posted: Sep 15, 2011 - 12:58 AM
I have looked on line for suffer rings and http://www.murrays.com has one that I can use. I just dont know how durable its? What are the web sites where I can buy a snuffer ring and sock from. -
- Rank: Mate
- Registered: Nov 16, 2002
- Last visit: Jul 04, 2020
- Posts: 139
Posted: Sep 15, 2011 - 06:30 AM
Check your inbox...I sent you a message.
--
Kenny Boudreaux
2010 C2 F18 USA 323
Goodall Design "Southern Area Rep"
Owner of Sailboxes.com
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Sep 15, 2011 - 06:40 AM
-
- Rank: Lubber
- Registered: Sep 12, 2011
- Last visit: Jul 01, 2014
- Posts: 10
Posted: Nov 20, 2011 - 05:39 PM
Ok well I've decided to buy the SNU snuffer ring and bag. But I want to make my own spinnaker pole out of aluminum. I'm going to use one that is 11.5 to 12 feet long that is an 1.5inch in diameter. I just don't what the wall thickness should be -
- Rank: Mate
- Registered: Jun 17, 2011
- Last visit: Sep 24, 2023
- Posts: 783
Posted: Nov 20, 2011 - 06:18 PM
.120 is plenty thick and cheaper than ,083 or .065 there is a snuffer ring in the classifieds now at half the cost of the snu
--
Greenville SC
Offering sails and other go fast parts for A-class catamarans
-- -
- Rank: Mate
- Registered: Jan 14, 2004
- Last visit: Sep 25, 2024
- Posts: 866
Posted: Nov 20, 2011 - 06:43 PM
Don't use .120 wall thickness, way to thick and heavy. You want .065. Find yourself a sunfish boom, it's .065 and already anodized and meets your length requirements.
--
Philip
-- -
- Rank: Mate
- Registered: Jun 17, 2011
- Last visit: Sep 24, 2023
- Posts: 783
Posted: Nov 20, 2011 - 09:16 PM
The cost difference is $75 when I quoted it last week. .065 would be about 6 pounds .120 about 11 pounds . I would rather spend the $75 on something else considering we are talking about a hobie 18. That's if used material doesn't work out.
Edited by bacho on Nov 20, 2011 - 09:17 PM.
--
Greenville SC
Offering sails and other go fast parts for A-class catamarans
-- -
- Rank: Mate
- Registered: Nov 16, 2002
- Last visit: Jul 04, 2020
- Posts: 139
Posted: Nov 21, 2011 - 09:09 AM
I've got one...see the used parts classified ads...1/2 the price of a new one!
--
Kenny Boudreaux
2010 C2 F18 USA 323
Goodall Design "Southern Area Rep"
Owner of Sailboxes.com
-- -
- Rank: Mate
- Registered: Oct 26, 2002
- Last visit: Sep 23, 2019
- Posts: 390
Posted: Nov 21, 2011 - 08:59 PM
I've got an alum pole off an F18HT. I also have experience with SNU snuffers.
Dave
509 276 6355
Edited by davefarmer on Nov 21, 2011 - 07:01 PM. -
- Rank: Lubber
- Registered: Sep 12, 2011
- Last visit: Jul 01, 2014
- Posts: 10
Posted: Nov 22, 2011 - 03:06 AM
Thanks for the info on the pipe. Is there anywhere I can find pics for setting up the rigging for the spinnaker pole. -
- Rank: Lubber
- Registered: Jan 29, 2009
- Last visit: Aug 07, 2013
- Posts: 25
Posted: Nov 24, 2011 - 10:17 PM
A sunfish spar or something similar is a great pole. Or a used windsurfer mast works too.
--
AJ Sawyer
Nacra 20
San Diego, CA
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.