Main Sheet
-
- Rank: Lubber
- Registered: Sep 14, 2011
- Last visit: Sep 17, 2011
- Posts: 2
Posted: Sep 17, 2011 - 04:43 PM
Does anyone know how many feet of main sheet with 6:1 blocks it takes for the P-18? -
- Rank: Lubber
- Registered: Jun 14, 2011
- Last visit: Sep 17, 2011
- Posts: 4
Posted: Sep 17, 2011 - 05:46 PM
Used 45ft on mine (standard blocks) based on info from Salty Dog Marine and it's maybe 5ft short with traveler and main all out.
--
Lance
P18
Simi Valley
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Oct 17, 2011 - 12:10 AM
Bozo,
Consider using a 10 foot section of smaller diameter line tied to the mainsheet for the main traveler. It will feed better through the P18 cleats and fairlead. If your mainsheet is 7/16" use 5/16" for the traveler part. P18s were actually sold this way from most dealers. You can splice the ends together or use a water knot or double sheet bend. I use the latter.
Sheet In!
Bob
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Oct 17, 2011 - 09:27 PM
+1
--
Rob
OKC
Pile of Nacra parts..
--
Users on-line
This list is based on users active over the last 60 minutes.