Hobie 18 boat bunks for the trailer
-
- Rank: Lubber
- Registered: Sep 12, 2011
- Last visit: Jul 01, 2014
- Posts: 10
Posted: Oct 13, 2011 - 12:20 AM
One of my hulls cracked when I was letting the mast down about a month ago. I have fixed the the hulls but I still havent been able figure out a way to replace the rollers. I would like to put boat bunks on the front of my trailer but I havent been able to find any plans or pics of one. I have looked into the ones from Hobie but I dont want to spend $300 on two cradles. I need Ideas or pics if anyone has made a set of hull cradles? -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Oct 13, 2011 - 01:38 AM
http://www.sailboxes.com/…bie-18-hull-cradles.html
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Mate
- Registered: Apr 26, 2004
- Last visit: Nov 05, 2024
- Posts: 399
Posted: Oct 13, 2011 - 05:55 AM
~~ I did this for my 17 & 18 after the snow crushed my 17 hull......(lets see if I can do this right)
--
~ Vietnam Vet 69-71~ 17 Hobie w/big jib, ~18 Hobie mag,~DN Ice sailor,
and other toys.......
~~ I live in NY state on the north shore of Oneida lake in
Bernhards Bay. ~~~~~~
-- -
- Rank: Mate
- Registered: Apr 26, 2004
- Last visit: Nov 05, 2024
- Posts: 399
Posted: Oct 13, 2011 - 06:01 AM
~~~~~~ 2x10x10 with 2x4 on the sides..... use carriage bolts on the 2x10's through the frame supports, & an old piece of carpet~~~~~
--
~ Vietnam Vet 69-71~ 17 Hobie w/big jib, ~18 Hobie mag,~DN Ice sailor,
and other toys.......
~~ I live in NY state on the north shore of Oneida lake in
Bernhards Bay. ~~~~~~
-- -
- Rank: Mate
- Registered: Jan 21, 2003
- Last visit: Feb 10, 2015
- Posts: 115
Posted: Oct 13, 2011 - 07:54 AM
I used 10" PVC sewer pipe cut 24" long and then cut radially into thirds for my rear cradles. made 12" x 12" bunks for the fronts using 2X6's covered with plywood. Put astroturf from home depot on all four. Used the pins from the rollers to make the cradles articulate in the rear. Search hobie cat's website for a guy named "idahosailor" and his "big project." I can take pictures if needed. Let me know.
http://www.hobiecat.com/f…php?f=13&t=12641&start=0
Edit for link.
Edited by presto99 on Oct 13, 2011 - 08:03 AM.
--
Jeff
Houston TX
1986 Hobie 18 Sail# 13031
-- -
- Rank: Mate
- Registered: Jun 17, 2011
- Last visit: Sep 24, 2023
- Posts: 783
Posted: Oct 13, 2011 - 05:31 PM
I bought a pair from murrays for about $120 shipped. They are not $300
--
Greenville SC
Offering sails and other go fast parts for A-class catamarans
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Oct 14, 2011 - 06:17 PM
One of the best things you can do for your cat is to weld on a rear mast support to your trailer so that your mast never rests on the hulls. Hinge the support so that it swings down 90 degrees for launching. Trailering with the mast resting on the boat's rear crossbar puts a lot of weight on the rear of the boat and makes the front part ahead of the trailer supports cantilever even more, breaking down the fiberglass at that front roller. Unweight the rear of the boat and take the stress off the front. One of life's little Paradoxes.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.