Hi there,
can someone tell me the height and the width of the daggerboard.
thank you
max
H18 daggerboard measure
-
- Rank: Lubber
- Registered: Oct 23, 2011
- Last visit: Nov 15, 2011
- Posts: 14
Posted: Oct 23, 2011 - 02:32 PM
-
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Oct 23, 2011 - 02:42 PM
46" x 16" x 1" Pete -
- Rank: Lubber
- Registered: Oct 23, 2011
- Last visit: Nov 15, 2011
- Posts: 14
Posted: Oct 23, 2011 - 02:54 PM
ops mine is 43.7" X 16
too short but there are no damage signs on the bottom -
- Rank: Lubber
- Registered: Oct 23, 2011
- Last visit: Nov 15, 2011
- Posts: 14
Posted: Oct 24, 2011 - 10:31 AM
Someone else ?
just to have a double check... -
- Rank: Mate
- Registered: Jun 17, 2011
- Last visit: Sep 24, 2023
- Posts: 783
Posted: Oct 24, 2011 - 03:07 PM
Are you measuring the total height or just the edge?
--
Greenville SC
Offering sails and other go fast parts for A-class catamarans
-- -
- Rank: Lubber
- Registered: Oct 23, 2011
- Last visit: Nov 15, 2011
- Posts: 14
Posted: Oct 25, 2011 - 02:39 AM
Total height not the diagonal, just put it on the table ans measure the height.
max -
- Rank: Lubber
- Registered: Oct 23, 2011
- Last visit: Nov 15, 2011
- Posts: 14
Posted: Nov 15, 2011 - 01:14 AM
So, my board miss some centimeters.
I need to fix this...
I take a piece of marine board wood and cut the piece that is missing
this is the 2cm marine wood profile.
I have used sandpaper to shape the piece and then with epoxy and a special structural filler i glued them togheter
And then shaped by hand
next step i'll use some carbon fiber to join the old piece with the new one and paint with epoxy and graphite filler.
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.