My less than technically (electronically) competent sailing buddy is a proud owner of a Mystere 5.0 without daggerboards
When we pulled the boat for the season, we noticed cracks (almost all the way through) in the rudder bracket castings.
Anyone know where these can be purchased new, as I understand the company no longer exists?
I do not think they can be welded and shaped, as it looks like a aluminum/magnesium composition, but I could be wrong
Any advice is desired as he loves this boat, and he and I are pretty close skill and boat performance wise, and I would hate to lose him from my weekly sails
--
Supercat 15
Windrider 17
Several Sunfish and Sunfish clones
Ratboat built from Zuma and Sunfish parts
Shallow water sailor in the Delaware Bay
--
Mystere 5.0 rudder parts
-
- Rank: Mate
- Registered: Oct 20, 2011
- Last visit: Apr 03, 2023
- Posts: 167
Posted: Nov 01, 2011 - 07:37 AM
-
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Dec 04, 2024
- Posts: 7090
Posted: Nov 01, 2011 - 09:13 AM
you can weld these parts, i have had my castings welded
you can also contact Mystere for parts (but they are used)
From another post:
As you probably know, Mystere Canada's website is gone. I heard that the company was sold. However, I searched and found that Yves Sansoucy has continued to run his sailing school, École de voile Sansoucy.
I contacted them them by phone and spoke with his daughter, Kim Sansoucy, who told me (in very acceptable English) that parts for Mystere beachcats are available through their company. She emailed me an old parts list which I will try to attach in another note. Here are several quotes from her concerning my interest in buying an UPPER casting:
"The dealership of mystere international is own by École de voile Sansoucy. So if you need some parts it will be a pleasure to serve you. The price for the upper casting with arm is 109.00 $CDN we accept credit card you can fax your credit card number at 450-420-9816
Kim Sansoucy
École de voile Sansoucy
150, 27e avenue Pointe-Calumet
J0N 1G1
(450) 472-8042" -
- Rank: Mate
- Registered: Oct 20, 2011
- Last visit: Apr 03, 2023
- Posts: 167
Posted: Nov 01, 2011 - 09:40 AM
Thanks for the response. I wasn't aware that they were still around, so if the welding doesn't work, I am happy to know they can be acquired
--
Supercat 15
Windrider 17
Several Sunfish and Sunfish clones
Ratboat built from Zuma and Sunfish parts
Shallow water sailor in the Delaware Bay
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Nov 01, 2011 - 10:42 AM
Another source for Mystere is to use Kijiji. Select Quebec, & type "catamaran" in the general search. Thye were originally built in Quebec, & there were quite a few for sale via Kijiji this fall. You may find one for parts, or contact sellers, who may have spare parts.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Oct 20, 2011
- Last visit: Apr 03, 2023
- Posts: 167
Posted: Nov 01, 2011 - 01:49 PM
Thanks much
This may keep a local guy from going back to monohulls and another beachcat alive
--
Supercat 15
Windrider 17
Several Sunfish and Sunfish clones
Ratboat built from Zuma and Sunfish parts
Shallow water sailor in the Delaware Bay
-- -
- Rank: Lubber
- Registered: Feb 21, 2006
- Last visit: May 22, 2012
- Posts: 1
Posted: May 22, 2012 - 07:36 AM
Hi all, to obtain Mystere parts, go to www.mysterecomposites.com. Mystere is up and building. Specific email address for parts is; parts@mysterecomposites.com
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.