In the St. Louis area and plan to sail in Carlyle Lake. I have been through the rigging and made some iimprovements on the cat. Really just changing out some hardware and lines. The information found on this site has helped a lot. The hulls seem fine and the sails will be tested next Spring. I could always use the experience of a local cat sailor.
I look forward to any advice I can get.
Thanks
--
Machineman
"El Terrible"
Prindle 16 ('82)
St. Louis (S. IL)
--
New (to me) Prindle 16 in Southern Illinois
-
- Rank: Lubber
- Registered: Dec 16, 2011
- Last visit: Jan 13, 2012
- Posts: 4
-
- Rank: Mate
- Registered: Aug 10, 2010
- Last visit: Jan 07, 2022
- Posts: 356
Welcome aboard! Looks like a great lake to sail on. Have fun and just take her out on a calm day maybe 10mph for starters.
--
Nacra 6.0 NA
Ogden Dunes, IN
-- -
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
the single best thing you can do to the boat is go through the rudder system and balance the helm by the book(you can download owners manual here on this site)...this will take a few trips to get like you want it but when you have it right it's a pleasure. other things to look for on old p-16's is the dolphin striker rod seizing up to the mast base, leaky port hole covers(replace!), old standing rigging about to die, look for tears in main sail along the bolt rope next to the batten covers, soft spots in hulls, tramp soundness, and a general inspection of all fasteners(shroud pins, bolts holding hulls and rudder goudgeons. an ounce of prevention! good luck and keep us posted!
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
-- -
- Rank: Mate
- Registered: Oct 19, 2006
- Last visit: Aug 16, 2017
- Posts: 613
Ray, check your PM (private messages), sent you my contact info....
Turbo
--
TurboHobo
H14T
H16
P18
G-Cat 5.0
P16
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.