Hi Folks, I am replacing the downhaul cheek blocks on my mast and would like to know if anyone here knows the correct rivet sizes to use as replacements. I assume with the depth of the cheek blocks that they will not be standard.
Thanks in advance
--
85 Prindle 16
"If you aint the lead dog the view never changes"
North Carolina
--
P16 downhaul help
-
- Rank: Lubber
- Registered: May 04, 2010
- Last visit: Sep 15, 2012
- Posts: 84
Posted: Jan 25, 2012 - 05:16 PM
-
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
Posted: Jan 26, 2012 - 02:34 PM
Depends on the blocks. i just replaced mine last year with harken cheek blocks and they are different than the old ones that were on it and the depth was not an issue. I want to say the rivet was 3/16ths but not sure what the depth was.
This what I replaced mine with
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
-- -
- Rank: Lubber
- Registered: May 11, 2009
- Last visit: Jul 18, 2022
- Posts: 29
Posted: May 02, 2012 - 09:20 AM
How many cheek blocks are on a P-16?. Mine is in out of town storage, but I do recall the plastic broke last year. I thought there was only one.
--
Dave R.
Grand Haven, MI
'84 Prindle 16
-- -
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
Posted: May 02, 2012 - 10:18 AM
there is 2 on mine, one on each side. if the sheaves are missing they still work fine...i have about 4' of line for the downhaul and when you thread that through the 2 blocks and the eye of the sail you still get mucho purchase. so they are not critical but new ones won't hurt!
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Dec 10, 2024
- Posts: 1461
Posted: May 02, 2012 - 06:51 PM
All Prindles were built with 3/16" Monel rivets, now available through Murray's Marine. Is your hole enlarged? They sell a SS sleve that fits over the rivet to take up the slack, and is covers the end of the rivet inside so no water passes through.
RIVET MSP 6-10 (3\16 X 5\8)
Code: 19-5023
Price: $0.75
Unit: EACH
Sleeve
RIVET CASING 6-10 (3\16 X 1\2)
Code: 19-5020
Price: $0.75
Unit: EACH
"Stainless casing prevents leaking through the center of rivet. Also used to replace rivets in worn, oversized holes, as in Hobie® castings and sidebars. For 3/16" diameter rivets up to 5/8" penetration. Requires 13/64" hole. This casing is suggested for use with #19-5022 (MSP 6-6) rivets with steel mandrels because they pull tighter than rivets with stainless mandrels."
Quote from the Murray's web site.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Aug 13, 2010
- Last visit: Mar 10, 2014
- Posts: 294
Posted: May 03, 2012 - 12:17 AM
BILL !! THERE "IS " TWO ON MINE ??? I know you all were prolly doing lots of liquid stuff is high school BUT good english is imporant.. (spelling is not).. "There "ARE" two on mine.. Was thinking about a big contract for ya-all and staff.. but the EIO got nervouse about the language thing.. WE have our standards here on the west coast..
And leave the "MUCHO" to the Cal South guys. Sounds funny when you all say it with that drall. By the way.. How's noodling this year. enough fish for the chicks and some for leftovers.. Got to be doing that when the wind is down.. Tastes great with the beer.. Cheers H
--
Hal Liske
Livermore CA
H 16 (6+ 1.. Friends) H 3.2 N 5.2 (2) H 17 (2) H-18
Nacra 5.8 (son's) H 20 (Friends)
It's a Sickness
I Need a A Cat Please
-- -
- Rank: Mate
- Registered: May 29, 2010
- Last visit: Apr 28, 2015
- Posts: 454
Posted: May 03, 2012 - 09:18 AM
Yall gone be suprised when Saint Peter meets you at the Paerly Gates and says" Yall git in the back of the truck, we going to the big house"
--
Nacra 5.2
-- -
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
Posted: May 03, 2012 - 06:38 PM
ahhh...grasshopper hal...now you learn first lesson of selling "quality pre-owned" merchandise...ALWAYS let the customer think they are smarter than you...let their pompacity cloud there judgement of your skills. ray charles called it "country dumb", hitler was sure the allies were going to land at calais right? now for more lessons from the master, you must pour that fancy dancy home brew of yours down my cake-hole! that is all...
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
-- -
- Rank: Mate
- Registered: Jun 16, 2010
- Last visit: Oct 03, 2013
- Posts: 141
Posted: May 04, 2012 - 10:56 AM
Goodt english be berry impotant Mr. Coastrat. I been tolt dat my hole stay here on dis worlt. Wifout goodt english, you can't communicates wif yo fellow man. But most impotantly, you can't communicate wif yo fellow womans. So Mr. Coastrat, I recommends dat you brush ups on goodt english so dat da ladies you be talkhen at, no wat you be tellin dem to do. I myself got goodt english skills, such dat I be surrounded by ladies all day long and all nite long and even in da shower, yup I also recommend Mr. Coastrat, dat you take a shower wif yo lady so dat you can compliment yo lady on her buttiful eyes. Over.
Edited by Backasswards on May 04, 2012 - 10:59 AM.
--
Hank, Hattiesburg, Mississippi, P16 - "Sideways"
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.