Prindle 18-2 boom shape
-
- Rank: Lubber
- Registered: Jan 27, 2012
- Last visit: Jan 28, 2012
- Posts: 2
Posted: Jan 27, 2012 - 02:07 PM
I just bought a 1987 Prindle 18-2. It has an unsubstantial-looking rectangular boom, not a teardrop or eliptical extrusion. Does that sound like original equipment? Thanks for any help. -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Sep 25, 2024
- Posts: 1459
Posted: Jan 27, 2012 - 02:30 PM
It is probably the original, but hardly unsubstantial. Posting a picture will help.
It should also have a 4:1 internal outhaul car, a clamcleat for the mast rotation control, a single bale for mainsheet blocks and stainless steel hardware for connection to the mast.
The Prindle 18-2 and the 19 use the same boom. Later NACRAs (that use a boom) moved to a square one as well.
Edited by klozhald on Jan 27, 2012 - 01:33 PM.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Lubber
- Registered: Jan 27, 2012
- Last visit: Jan 28, 2012
- Posts: 2
Posted: Jan 28, 2012 - 06:31 AM
It is as you described above. Will post a photo later today. Thank you for your post...and peace of mind.....
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.