I turned the P18 over the other day to find a nasty ding that is into the glass that I think I am going to have to give some attention to. There are other older ones but none as serious. The first pic is the one I just found, It is right in the middle on the inside of the hull near the keel. Also the bottoms really need some attention. This just the one side.
I have heard many say you need to use polyester for a bottom job. I all ready have most of the Wests for a injection repair on the H17 so I really don't want to buy poly also. Anybody think it is a big deal to add some glass to the bottoms with wests. I do hope to add some gelcoat to it. What do I need to do extra to make it work?
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
--
Looks like the P18 needs some attention.
-
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
-
- Rank: Lubber
- Registered: Apr 01, 2012
- Last visit: Apr 06, 2012
- Posts: 11
Actually you would want to use west sytems or similar epoxy below the water line and not polyester. According to Don Casey. Hope that helps.
http://www.boatus.com/howto/howto_lib.htm
Edited by waterrat on Apr 02, 2012 - 09:00 AM.
--
Michigan
P18
--