Now that im out of school i plan on adding ports to my 1983 hobie 16 and then restoring the color. I was wondering were people like their ports and how big they should be. i was thinking 5in and between the frame.
Thank you
optikid
Edited by optikid on Jun 04, 2012 - 07:41 PM.
Ports on a H16
-
- Rank: Mate
- Registered: May 29, 2011
- Last visit: Mar 13, 2016
- Posts: 332
Posted: Jun 04, 2012 - 07:41 PM
-
- Rank: Mate
- Registered: Aug 16, 2011
- Last visit: Jun 03, 2022
- Posts: 224
Posted: Jun 04, 2012 - 07:51 PM
i have been avoiding the port idea for the last 10 years or so, i know at some point i will have to do something.
--
Kenneth Purdy
Hobie 16
Nacra 5.2 (2)
Banshee
First Coast, Florida
-- -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Jun 04, 2012 - 07:54 PM
Here's an old article on installing Hobie 16 deck ports, still good information.
http://www.thebeachcats.c…9/installing-deck-ports/
Be great if our Hobie 16 sailors could review it for any updates, it's about 15 years old. Of course most of the boats are much older than that.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Mate
- Registered: Apr 26, 2004
- Last visit: Nov 05, 2024
- Posts: 399
Posted: Jun 05, 2012 - 03:18 AM
~~ I'd advise against it!! but if ya have inside hull work to do, well then ya have to.... Make sure ya get the "curved ports, not the flat ones.. Whats yer reason for doing it ??? Just asking !!
--
~ Vietnam Vet 69-71~ 17 Hobie w/big jib, ~18 Hobie mag,~DN Ice sailor,
and other toys.......
~~ I live in NY state on the north shore of Oneida lake in
Bernhards Bay. ~~~~~~
-- -
- Rank: Mate
- Registered: May 29, 2011
- Last visit: Mar 13, 2016
- Posts: 332
Posted: Jun 05, 2012 - 03:52 PM
just for storage and so i can dry out the hulls. -
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
Posted: Jun 05, 2012 - 07:46 PM
if you keep your boat on a trailor, then you can do a real nice job of keeping the hulls dry. after each time i sail i rinse the boat down good with fresh water, including the inside of the hulls...then raise the trailor up pretty high to help drain. then i put 2 wet 1/8" lines hanging out of the drains to wick out the last bit of water. this works great, make sure to leave the ports open.
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
-- -
- Rank: Mate
- Registered: Mar 20, 2012
- Last visit: Jun 16, 2014
- Posts: 248
Posted: Jun 05, 2012 - 08:49 PM
Hey, cool trick! I like the wet wick idea. The drains on the P-Cat are about half an inch off the bottom of the hulls, so they never fully drain.
Thanks!
Tom
--
Tom Benedict
Island of Hawaii
P-Cat 18 / Sail# 361 / HA 7633 H / "Smilodon"
-- -
- Rank: Mate
- Registered: May 29, 2011
- Last visit: Mar 13, 2016
- Posts: 332
Posted: Jun 06, 2012 - 05:14 AM
i dont have a trailer... it lives on the beach wheels. -
- Rank: Mate
- Registered: May 29, 2011
- Last visit: Mar 13, 2016
- Posts: 332
Posted: Jun 06, 2012 - 06:44 PM
My main questions was were should i put them? in the back or in between the frame?
thanks -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Jun 06, 2012 - 07:13 PM
are your hulls soft from the past 20 years of moisture? if not, i personally wouldn't cut em... get a tramp bag and wait till you have damage that requires cutting a hole in your deck. -
- Rank: Mate
- Registered: May 29, 2011
- Last visit: Mar 13, 2016
- Posts: 332
Posted: Jun 06, 2012 - 07:29 PM
yes they are, from my beach wheels they put to much pressure on the sides, but i got new wheels.
-
- Rank: Mate
- Registered: May 29, 2011
- Last visit: Mar 13, 2016
- Posts: 332
Posted: Jun 09, 2012 - 08:35 AM
Bump, no one has done this?
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.