There's a plastic rope lock on my trapeze wires used to adjust the trap height. When hiked out, these little locks are essentially supporting my weight. I am not a fan of them, I must have mis-installed one of them and when out on the wire, it slipped and dumped me in the water. So, a two part question...is there a guide to show proper installation of these suckers? And secondly, is there a more secure way to adjust the trap height?
--
Karl, Captain of Stayin' Thirsty
2011 Hobie 16SE
Atlanta, GA
--
Rope Locks on Trapeze Wires
-
- Rank: Mate
- Registered: May 27, 2011
- Last visit: Sep 17, 2014
- Posts: 145
-
- Rank: Lubber
- Registered: Aug 17, 2011
- Last visit: Jul 31, 2012
- Posts: 68
The only place online that I can find that sells these things is Murray's. They have a picture of one that is properly rigged: http://www.murrays.com/mm…ics/00000001/01-0120.jpg
As for other secure means of holding, I use the double overhand stopper knot. http://www.animatedknots.com/doubleoverhand/index.php
--
Daniel T.
Taipan F16 - USA 213
Clearwater, FL
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
You must have them installed wrong, I have never seen them slip. They call for 2 turns, but even with one they are bulletproof. Should look like this;
Note difference between the top & bottom ends. You want line led so that what shows at teh top end comes into contact with the block when you hike out. If it is the other way you will wear the line.
Edited by Edchris177 on Jun 17, 2012 - 07:40 PM.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
they do break and should be inspected for UV damage and wear every now and again -
- Rank: Lubber
- Registered: Apr 11, 2012
- Last visit: Oct 12, 2012
- Posts: 53
I've heard them called dogbones and yes, they do break. I had one break 2 weekends in a row (different ones). First time I was trapped out skippering and my buddy was trapped out too. His broke and it was man overboard. The second time I was out on the wire and my buddy was driving. Man overboard again.
If you're lucky enough not to loose the hook in ring then you can just tie a bowline around the block to the right height and continue on.
If you want to get fancy since you're replacing parts already you can convert it to an on-the-wire adjustable rig with a v-jam block or a clam cleat.
Clam Cleat:
V-Jam Block
V-Jam rigging:
Edited by kraven on Jun 18, 2012 - 05:45 AM. -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
-
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Yes, quite correct Andrew, I have had one break. What I meant by bulletproof, was the issue of slipping. I have never seen them slip if the line is run as shown.
[quote]V-Jam rigging:
Isn't that a waste of the double fiddle block?
By using one sheave to dead end the line, you have wasted that sheave.
Edited by Edchris177 on Jun 19, 2012 - 07:09 AM.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Lubber
- Registered: Apr 11, 2012
- Last visit: Oct 12, 2012
- Posts: 53
That's the contents of the Hobie adjustable trapeze kit so maybe they have some reasoning for it. But yeah, you could probably go cheaper with this single sheave Ronstan V-Jam
You could also switch the single block for a block with a becket. Then you could utilize that second sheave and get 3:1 instead of 2:1.
I've trapped on boats with the Hobie system and the clam cleat setup and prefer the clam cleat.
Edited by kraven on Jun 19, 2012 - 07:33 AM. -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Haven't had the chance to try the clam cleat. I use the Harken fiddle, but the other block has a becket, allowing the use of both sheaves in the jam block. The additional purchase makes for 1 handed adjustment while on the wire, with tiller & main sheet in the other hand.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
did ya get t-bagged?
the worst for me was when my "Can't Miss" handle broke. I was in the gulf, no one around ... I fell in, held the main until she capsized.. and couldn't self right it (with murray's bag) ... and waited about 30 min for a kind jet skier to stop and help -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
i use the clam cleat, they are great but you can't see the insides of the roller sheeve (when they are gonna fail)
reminds me i need to replace mine... -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Not that lucky. I hooked up, pushed out... and just kept going. I don't know how, but the hook popped out when the biscuit broke. I did a backwards swan dive, the boat flipped. Luckily the mast dug in & tried to turtle as the wind drove it. I swam to the boat as it slowly pivoted around the mast tip, which had hit bottom & was in the mud.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
-
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
After a failure of a rope lock I have been doubling them. Just put 2 back to back and put the rope through both. I assisted a Hobie dealer put together a new Hobie Tiger shortly after they first came out and noticed that the rope locks that came with the boat were about twice the size as the ones on a 16. Thats when I decided to double mine, the others were not available then, they may be now. -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
This just happened again on my N5.7, using the Schaefer fiddle block with jam cleat. The plastic biscuit broke.
Cost of parts now sleeping with the fish...about $15
Loss of two good German Beers...$4
Hearing that "phhtthwack" noise, & watching my buddy get ejected as it let go, all the while trying to save his cerveza...priceless.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
-
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
The loss was even more painful as those were the last onboard, the day was sweltering, & we were not in Home Bay.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
-
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
HA HA...early in the season 78F would be normal. Last week end it was in the 90's, humidity 80%, much like your area.
Being further north the sun is not as intense as where you are though.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
close ... but it's in the 80's by 8am and 5000% humidity.. we haven't figured out how it's above 100% but i think it has something to do with quantum physics