I have a solcat 18 and i recently found when i was righting the boat after capsizing that on the inside of the port hull there is a major soft spot (from the rear beam to the front beam). any tips on how i should go about fixing it would be great!
--
Kent VanSickle
Saginaw Bay Yacht Club
Bay City, Michigan
--
Soft spot repair
-
- Rank: Lubber
- Registered: Mar 16, 2012
- Last visit: Jun 22, 2012
- Posts: 6
Posted: Jun 21, 2012 - 04:17 PM
-
- Rank: Mate
- Registered: Oct 19, 2006
- Last visit: Aug 16, 2017
- Posts: 613
Posted: Jun 21, 2012 - 07:41 PM
Kent, do a quick search on "delamination repair", this subject has been discussed repeatedly on this site, it is a relatively easy fix no matter your expertise or lack thereof............
--
TurboHobo
H14T
H16
P18
G-Cat 5.0
P16
-- -
- Rank: Mate
- Registered: May 29, 2011
- Last visit: Mar 13, 2016
- Posts: 332
Posted: Jun 21, 2012 - 08:35 PM
none of them cover how to fix the inside of the hulls -
- Rank: Mate
- Registered: Feb 19, 2008
- Last visit: Aug 26, 2023
- Posts: 671
Posted: Jun 21, 2012 - 09:43 PM
same theory -
- Rank: Mate
- Registered: Jun 08, 2009
- Last visit: Aug 19, 2013
- Posts: 132
Posted: Jun 22, 2012 - 12:46 AM
I recently did the inside delam fix on our p18, easy as pie!
--
Stefan, Denmark.
H14,H16,P16,P18,SC17,N5.8
Team StaySail
http://www.staysail.eu
-- -
- Rank: Lubber
- Registered: Mar 16, 2012
- Last visit: Jun 22, 2012
- Posts: 6
Posted: Jun 22, 2012 - 01:04 AM
Thanks for the help!
--
Kent VanSickle
Saginaw Bay Yacht Club
Bay City, Michigan
-- -
- Rank: Mate
- Registered: Dec 18, 2009
- Last visit: Oct 10, 2019
- Posts: 117
Posted: Jun 22, 2012 - 02:55 PM
Kent, West Systems has a book on repairing fiberglass that is very helpful. I picked mine up at West Marine. If you are interested I could fax you the pages on repairing hull delamination. If interested e-mail me with a fax number at poultonscott@aol.com.
--
Scott
ARC 21
Prindle 18
Annapolis, Maryland
-- -
- Rank: Lubber
- Registered: Feb 01, 2012
- Last visit: Oct 19, 2012
- Posts: 10
Posted: Oct 19, 2012 - 09:01 AM
I have found the same on both of my Solcat 18's. Im thinking about separating the deck from the hull and re-glass the entire deck from the inside. The week decking on mine is from the stern to about the middle in addition to several areas on the hulls,,,, de lamination 6-8" to 10-14". seams like the best idea
--
SolCat 18 "1977"
Middle Chesapeake Bay
Josh R.
jorinehart.jr@gmail.com
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Oct 20, 2012 - 12:17 PM
Some of the guys here have hulls that have more area injected than not! An hour searching will get you all the info you need.
Here is an idea for doing large areas quickly, bottom of thread.
http://www.thebeachcats.c…c/13937/start/0#pid41365
Edited by Edchris177 on Oct 20, 2012 - 12:22 PM.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
--
