I'm trying to remove a wheel from my cat trax but have run into a problem. I have removed the outer plastic end cap and pulled out the cotter pin but now the rubber "fire hose" is the only thing keeping the wheel on. Do I have to removed the "fire hose" to get it off? Is it glued down? I wasn't able to easily slide it off.
--
-Zach
--
How do I removed a cat trax wheel/hub?
-
- Rank: Mate
- Registered: Apr 24, 2011
- Last visit: Mar 20, 2018
- Posts: 177
Posted: Jul 12, 2012 - 02:44 PM
-
- Rank: Mate
- Registered: May 29, 2011
- Last visit: Mar 13, 2016
- Posts: 332
Posted: Jul 12, 2012 - 05:07 PM
i have no idea but do you have the new or old style? -
- Rank: Lubber
- Registered: Jun 06, 2012
- Last visit: Sep 14, 2016
- Posts: 9
Posted: Jul 13, 2012 - 07:44 AM
The hose is probably preventing the hub from coming off the axle. It should not be glued on but know knows if you got them used.
I had to remove the hose off to get mine off the axle. It's a pain but it did come off. I used the bike handle bar grip method of removal.
--
Todd
Virginia Beach, VA
Nacra 5.0
-- -
- Rank: Mate
- Registered: Jan 24, 2012
- Last visit: Feb 26, 2016
- Posts: 173
Posted: Jul 13, 2012 - 09:21 AM
I always pull them apart from the middle and then take the wheel off inboard, They are bolted together so it is much easier than removing the outer rubber or cradle, etc. HTH, Ricardo.
--
Lake Perry KS
H-18
N-5.5 UNI +spin
-- -
- Rank: Mate
- Registered: Apr 24, 2011
- Last visit: Mar 20, 2018
- Posts: 177
Posted: Jul 14, 2012 - 07:31 AM
I don't think mine are bolted together in the middle. I think its all one piece.
--
-Zach
-- -
- Rank: Mate
- Registered: Apr 24, 2011
- Last visit: Mar 20, 2018
- Posts: 177
Posted: Jul 14, 2012 - 01:41 PM
If I could remove the hose cover from the end, I could slide it all off. Looks like mine is glued on. I could cut it off, but does anyone know where I could buy a similar hose around town? Tractor Supply? Ace Hardware? Lowes? I may go out shopping for hoses here soon.
--
-Zach
-- -
- Rank: Mate
- Registered: Oct 31, 2010
- Last visit: Oct 24, 2024
- Posts: 195
Posted: Jul 14, 2012 - 04:23 PM
It's probably not glued on just stuck. I ave an old set in my shed that the hose won't budge. I've briefly tried by using a screwdriver to pry it but no luck. The hose ends from Florida Sailcraft aren't that expensive, you'll prob have to cut it off. I looks like its some kind of large diameter radiator hose of some sort, you could probably find it from another source if you look around enough...
--
Mac
Midlands South Carolina
AHPC Viper USA 366
A Cat USA 366
Super Cat 17
-- -
- Rank: Mate
- Registered: Apr 24, 2011
- Last visit: Mar 20, 2018
- Posts: 177
Posted: Jul 15, 2012 - 06:53 AM
I found the exact hose at ACE Hardware. Slightly more expensive than Florida Sailcraft but now I don't have to wait for shipping.
--
-Zach
--
