Hobie 17 Sport Harken traveler screw size
-
- Rank: Lubber
- Registered: Dec 28, 2006
- Last visit: Jul 26, 2012
- Posts: 5
Posted: Jul 25, 2012 - 08:20 AM
I have a 1993 Hobie 17 Sport with the Harken traveler. My crossbar broke and I need to replace the traveler track onto the replacement crossbar. I'm trying to find the right tap to tap the holes in the cross bar. I bought an M6x1.0 tap but, although the screws seem to fit that threading, they are a bit looser than the original holes and threading in the original crossbar. Any idea on what size screws were used? -
- Rank: Lubber
- Registered: Dec 28, 2006
- Last visit: Jul 26, 2012
- Posts: 5
Posted: Jul 25, 2012 - 08:42 AM
Reply I got back from Harken:
I will assume you are mounting current small boat traveler track and that would mount with #10 or 5mm flat headed fasteners. -
- Rank: Lubber
- Registered: Dec 28, 2006
- Last visit: Jul 26, 2012
- Posts: 5
Posted: Jul 26, 2012 - 11:58 AM
They were actually #12-24 screws.
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.